Can't mapping a remote drive

In my network, I can see and access a remote sharing with \\machine\sharing
path, but if I try to mapping with Windows Wizard or with net use command, I
receive a message saing: error 53: the name computer can't be found. What's
happend?

Hi Max,

Thank you for posting here.

This behavior can occur if File and Printer Sharing for Microsoft Networks
is uninstalled or the check box for this service is cleared in the
properties of the associated network connection(s).

To resolve this behavior, make sure File and Printer Sharing for Microsoft
Networks is installed and enabled:

1. Log on to the computer with Administrator privileges.

2. Double-click My Computer.

3. Double-click Control Panel.

4. Double-click "Network and Dial-Up Connections".

5. Double-click the network connection you want to modify, and then
click Properties.

6. On the General tab in the "Components checked are used by this
connection" area, you should see File and Printer Sharing for Microsoft
Networks. If it is not listed, you can install it by clicking the
Install button and then double-clicking Service.

7. Verify that the check box next to File and Printer Sharing for
Microsoft Networks is selected. This allows shared resources to be
available on the network.

Also, I suggest you use the following steps to try again.

1. Open the \\<machine>\<share> in Windows Explorer.

2. Click Tools->Map network drive.

3. Add the \\<machine>\<share> share.

If it fails, please let me know the error in detail.

Hope this helps!

Sincerely,
Jack Wang, MCSE 2000, MCSA, MCDBA, MCSD
Microsoft Partner Support

Get Secure! - www.microsoft.com/security

================================================== ===
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
================================================== ===

This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| From: "Max André Bündchen" <(E-Mail Removed)>
| Subject: Can't mapping a remote drive
| Date: Fri, 27 Feb 2004 18:55:52 -0300
| Lines: 6
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2800.1158
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165
| Message-ID: <OOkQbxX$(E-Mail Removed)>
| Newsgroups: microsoft.public.windows.server.networking
| NNTP-Posting-Host: 200.203.45.100
| Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTN GP11.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.windows.server.networking:9613
| X-Tomcat-NG: microsoft.public.windows.server.networking
|
| In my network, I can see and access a remote sharing with
\\machine\sharing
| path, but if I try to mapping with Windows Wizard or with net use
command, I
| receive a message saing: error 53: the name computer can't be found.
What's
| happend?
|
|
|