Can't get WEP working

I have a D-Link DCF-660W and a matching router from DLink. They work fine
EXCEPT if I try and enable WEP.

I set both ends to 64 bit Hex and the key to ABCD12345 but as soon as I
enable WEP in the DCF660W the signal strength meter falls to zero and the
connection is lost. Resetting the DCF-660W makes no difference. The only way
to get a link back it to turn off WEP.

The system also seems to take a long time to allocate an IP address to the
DCF-660W (20 seconds?) but once it's working everything is fast and I get
11M connection speed

Any ideas?

In message <IYJ8b.18729$(E-Mail Removed)>, CWatters
<(E-Mail Removed)> writes
>I set both ends to 64 bit Hex and the key to ABCD12345
Shouldn't this be 5 sets of two hex characters, not 4 1/2 ?
--
Tony Morgan
Smile in the face of adversity - and adversity will probably
think you're taking the piss and kick the shit out of you.

CWatters,

You need 10 characters to make that work.

AD

Sorry that was a type. I meant ABCDE12345


"AWD" <ADulay-NOSPAM-@compuserve.com> wrote in message
news:bk04e9$e4v$(E-Mail Removed)...
> CWatters,
>
> You need 10 characters to make that work.
>
> AD
>
>