Cant access DSL504 ideas?

I can ping the router fine but when i type:

192.168.0.1 into the browser it just times out i dont get the config screen

Any ideas?

Tried unplugging etc still the same

"Chris" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I can ping the router fine but when i type:
>
> 192.168.0.1 into the browser it just times out i dont get the config
screen
>
> Any ideas?
>
> Tried unplugging etc still the same
>
>

open Internet explorer - tools - internet options- connections tab - lan
settings
Are all the ticks removed?? If not, try removing them, alos in the
connections tab, make sure its set to never dial.
Have you set up the gateway bit in lan tcp/ip settings???

Gareth

"Gareth not NLL or anybody else." <(E-Mail Removed)> wrote in
message news:bvqucr$vl1sq$(E-Mail Removed)...
>
> "Chris" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > I can ping the router fine but when i type:
> >
> > 192.168.0.1 into the browser it just times out i dont get the config
> screen
> >
> > Any ideas?
> >
> > Tried unplugging etc still the same
> >
> >
>
> open Internet explorer - tools - internet options- connections tab - lan
> settings
> Are all the ticks removed?? If not, try removing them, alos in the
> connections tab, make sure its set to never dial.
> Have you set up the gateway bit in lan tcp/ip settings???
>
> Gareth
>


sry maybe my post wasnt clear.
Its been fine but suddenly stopped letting me access. I can still access
the internet etc, i just cant get the config screen up anymore (from any of
the pc's).

i believe you can access it via the r232 port which i am am trying to figure
out how to do.

On Wed, 4 Feb 2004 13:02:55 -0000, "Chris" <(E-Mail Removed)> wrote:

>I can ping the router fine but when i type:
>
>192.168.0.1 into the browser it just times out i dont get the config screen
>
>Any ideas?
>
>Tried unplugging etc still the same
If it is the D-Link 504 you are on about here Chris get rid of it they
are crap just had one which was re setting to factory default ever
24hrs or so bloody rubbish they are.
Grant .

Chris,

power down all pcs and then switch the 504 off for a couple of minutes. When
it comes back up, power up your pcs and you should be able to get to it.
You original post said you were just typing in the ip address. Bit dumb, but
you are putting in the "http://" before it aren't you?

Let us know if this fixes it

Cheers,Mike
"Chris" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I can ping the router fine but when i type:
>
> 192.168.0.1 into the browser it just times out i dont get the config
screen
>
> Any ideas?
>
> Tried unplugging etc still the same
>
>

"fred bloggs" <(E-Mail Removed)> wrote in message
news:r5bUb.125$Y%(E-Mail Removed)...
> Chris,
>
> power down all pcs and then switch the 504 off for a couple of minutes.
When
> it comes back up, power up your pcs and you should be able to get to it.
> You original post said you were just typing in the ip address. Bit dumb,
but
> you are putting in the "http://" before it aren't you?
>
> Let us know if this fixes it
>
> Cheers,Mike

yep, had the http.
had to telnet in and reset it back to factory condition in the end.
powering down both the pcs and router might have been a good idea though.

"Chris" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> "fred bloggs" <(E-Mail Removed)> wrote in message
> news:r5bUb.125$Y%(E-Mail Removed)...
> > Chris,
> >
> > power down all pcs and then switch the 504 off for a couple of minutes.
> When
> > it comes back up, power up your pcs and you should be able to get to it.
> > You original post said you were just typing in the ip address. Bit dumb,
> but
> > you are putting in the "http://" before it aren't you?
> >
> > Let us know if this fixes it
> >
> > Cheers,Mike
>
> yep, had the http.
> had to telnet in and reset it back to factory condition in the end.
> powering down both the pcs and router might have been a good idea though.
>


grrr, its done it again. seems to be everytime i go in and change some
config.
I disabled port redirection this time, saved and restarted then after that
couldnt access it via the browser again.
tried powering - down didnt work, had to return it to the default config
again via telnet