Can't Access Base Station Mgmt. Tool

I log in with my password, and the screen changes the
page, as if it's about to open the management tool, but it
just hangs and doesn't complete the process. I'd like to
access the base station to change a setting, but it
doesn't work. I also got the same response when I typed
the url 192.168.2.1 in Internet Explorer. What's happening?

Hi Eric,

Check to see if there are any proxy information on your Internet
Explorer that might be blocking your access.

Check your Proxy info by doing the following
Open up your Internet Explorer, then click on Tools then Internet Options.
Now click on the Connections tab, and then click on the LAN settings button
then uncheck all the checkmarks in that window and then hit OK and then OK
again. Then in the address bar type in http://192.168.2.1/ and see if you
get the Base Station Management Tool screen.


--
Gary Tsang
Microsoft MVP - Windows XP Shell/User
http://www.microsoft.com/mvp


"Eric" <(E-Mail Removed)> wrote in message
news:7b3d01c43171$3e9eb370$(E-Mail Removed)...
>I log in with my password, and the screen changes the
> page, as if it's about to open the management tool, but it
> just hangs and doesn't complete the process. I'd like to
> access the base station to change a setting, but it
> doesn't work. I also got the same response when I typed
> the url 192.168.2.1 in Internet Explorer. What's happening?

>-----Original Message-----
>Hi Eric,
>
>Check to see if there are any proxy information on your
Internet
>Explorer that might be blocking your access.
>
>Check your Proxy info by doing the following
>Open up your Internet Explorer, then click on Tools then
Internet Options.
>Now click on the Connections tab, and then click on the
LAN settings button
>then uncheck all the checkmarks in that window and then
hit OK and then OK
>again. Then in the address bar type in
http://192.168.2.1/ and see if you
>get the Base Station Management Tool screen.
>
>
>--
>Gary Tsang
>Microsoft MVP - Windows XP Shell/User
>http://www.microsoft.com/mvp
>
>
>"Eric" <(E-Mail Removed)> wrote in
message
>news:7b3d01c43171$3e9eb370$(E-Mail Removed)...
>>I log in with my password, and the screen changes the
>> page, as if it's about to open the management tool, but
it
>> just hangs and doesn't complete the process. I'd like to
>> access the base station to change a setting, but it
>> doesn't work. I also got the same response when I typed
>> the url 192.168.2.1 in Internet Explorer. What's
happening?
>
>
>.
>I did as you suggested, but after logging into the Tool
screen, it still doesn't complete the process and just
hangs. Do you think there's something else I can try?

Have you tried power cycling your base station? As well as doing a hard
reset?

--
Gary Tsang
Microsoft MVP - Windows XP Shell/User
http://www.microsoft.com/mvp


"Eric" <(E-Mail Removed)> wrote in message
news:854b01c4323d$710c4580$(E-Mail Removed)...
>
>>-----Original Message-----
>>Hi Eric,
>>
>>Check to see if there are any proxy information on your
> Internet
>>Explorer that might be blocking your access.
>>
>>Check your Proxy info by doing the following
>>Open up your Internet Explorer, then click on Tools then
> Internet Options.
>>Now click on the Connections tab, and then click on the
> LAN settings button
>>then uncheck all the checkmarks in that window and then
> hit OK and then OK
>>again. Then in the address bar type in
> http://192.168.2.1/ and see if you
>>get the Base Station Management Tool screen.
>>
>>
>>--
>>Gary Tsang
>>Microsoft MVP - Windows XP Shell/User
>>http://www.microsoft.com/mvp
>>
>>
>>"Eric" <(E-Mail Removed)> wrote in
> message
>>news:7b3d01c43171$3e9eb370$(E-Mail Removed)...
>>>I log in with my password, and the screen changes the
>>> page, as if it's about to open the management tool, but
> it
>>> just hangs and doesn't complete the process. I'd like to
>>> access the base station to change a setting, but it
>>> doesn't work. I also got the same response when I typed
>>> the url 192.168.2.1 in Internet Explorer. What's
> happening?
>>
>>
>>.
>>I did as you suggested, but after logging into the Tool
> screen, it still doesn't complete the process and just
> hangs. Do you think there's something else I can try?