Cannot setup lan card

Hi all,

I have a computer using Win98 Second edition, and I have newly installed
a lan card into motherboard and startup windows 98, it can find the lan card
and installed for me. However, after re-boot, an error message about the Lan
card appeared. When I try to figure out the problem inside the control
panel, I find that here is a "!" sign at the lan card. However, when I plug
the network cable into the lan card, it show he proper light. I have no idea
what is going on, can anyone help me?

When you highlight the card in Device Manager and select Properties, what
does that tell you about the problem with the card?

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"B" <(E-Mail Removed)> wrote in message
news:buedom$(E-Mail Removed)...
> Hi all,
>
> I have a computer using Win98 Second edition, and I have newly
installed
> a lan card into motherboard and startup windows 98, it can find the lan
card
> and installed for me. However, after re-boot, an error message about the
Lan
> card appeared. When I try to figure out the problem inside the control
> panel, I find that here is a "!" sign at the lan card. However, when I
plug
> the network cable into the lan card, it show he proper light. I have no
idea
> what is going on, can anyone help me?
>
>

I have the same problem and it comes up with "The NDIS.VXD, NTKERN.VXD device loaders could not load the device driver for the device (code 2).

----- Richard G. Harper wrote: ----

When you highlight the card in Device Manager and select Properties, wha
does that tell you about the problem with the card

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroup
* for the benefit of all. Private mail is usually not replied to
* HELP us help YOU ... http://www.dts-l.org/goodpost.ht


"B" <(E-Mail Removed)> wrote in messag
news:buedom$(E-Mail Removed)..
> Hi all
>> I have a computer using Win98 Second edition, and I have newl
installe
> a lan card into motherboard and startup windows 98, it can find the la
car
> and installed for me. However, after re-boot, an error message about th
La
> card appeared. When I try to figure out the problem inside the contro
> panel, I find that here is a "!" sign at the lan card. However, when
plu
> the network cable into the lan card, it show he proper light. I have n
ide
> what is going on, can anyone help me
>>

I see Steve has given you a suggestion, so try his suggestion first.

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"Graham" <(E-Mail Removed)> wrote in message
news:F3A1EDB6-27BF-4CE0-BB4C-(E-Mail Removed)...
>
> I have the same problem and it comes up with "The NDIS.VXD,
NTKERN.VXD device loaders could not load the device driver for the device
(code 2)."
>
> ----- Richard G. Harper wrote: -----
>
> When you highlight the card in Device Manager and select Properties,
what
> does that tell you about the problem with the card?
>
> --
> Richard G. Harper [MVP Win9x] (E-Mail Removed)
> * PLEASE post all messages and replies in the newsgroups
> * for the benefit of all. Private mail is usually not replied to.
> * HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
> "B" <(E-Mail Removed)> wrote in message
> news:buedom$(E-Mail Removed)...
> > Hi all,
> >> I have a computer using Win98 Second edition, and I have newly
> installed
> > a lan card into motherboard and startup windows 98, it can find the
lan
> card
> > and installed for me. However, after re-boot, an error message
about the
> Lan
> > card appeared. When I try to figure out the problem inside the
control
> > panel, I find that here is a "!" sign at the lan card. However,
when I
> plug
> > the network cable into the lan card, it show he proper light. I
have no
> idea
> > what is going on, can anyone help me?
> >>

Steve's suggestion didn't work. Do you have any other
ideas?

Thanks
>-----Original Message-----
>I see Steve has given you a suggestion, so try his
suggestion first.
>
>--
>Richard G. Harper [MVP Win9x] (E-Mail Removed)
>* PLEASE post all messages and replies in the newsgroups
>* for the benefit of all. Private mail is usually not
replied to.
>* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
>"Graham" <(E-Mail Removed)> wrote in message
>news:F3A1EDB6-27BF-4CE0-BB4C-(E-Mail Removed)...
>>
>> I have the same problem and it comes up with "The
NDIS.VXD,
>NTKERN.VXD device loaders could not load the device
driver for the device
>(code 2)."
>>
>> ----- Richard G. Harper wrote: -----
>>
>> When you highlight the card in Device Manager and
select Properties,
>what
>> does that tell you about the problem with the card?
>>
>> --
>> Richard G. Harper [MVP Win9x] (E-Mail Removed)
>> * PLEASE post all messages and replies in the
newsgroups
>> * for the benefit of all. Private mail is usually
not replied to.
>> * HELP us help YOU ... http://www.dts-
l.org/goodpost.htm
>>
>>
>> "B" <(E-Mail Removed)> wrote in message
>> news:buedom$(E-Mail Removed)...
>> > Hi all,
>> >> I have a computer using Win98 Second
edition, and I have newly
>> installed
>> > a lan card into motherboard and startup windows
98, it can find the
>lan
>> card
>> > and installed for me. However, after re-boot, an
error message
>about the
>> Lan
>> > card appeared. When I try to figure out the
problem inside the
>control
>> > panel, I find that here is a "!" sign at the lan
card. However,
>when I
>> plug
>> > the network cable into the lan card, it show he
proper light. I
>have no
>> idea
>> > what is going on, can anyone help me?
>> >>
>
>
>.
>

Check the motherboard for leaking capacitors. This is a known symptom.

Carey

<(E-Mail Removed)> wrote in message
news:3b7001c3dfcd$8f940c80$(E-Mail Removed)...
> Steve's suggestion didn't work. Do you have any other
> ideas?
>
> Thanks
> >-----Original Message-----
> >I see Steve has given you a suggestion, so try his
> suggestion first.
> >
> >--
> >Richard G. Harper [MVP Win9x] (E-Mail Removed)
> >* PLEASE post all messages and replies in the newsgroups
> >* for the benefit of all. Private mail is usually not
> replied to.
> >* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
> >
> >
> >"Graham" <(E-Mail Removed)> wrote in message
> >news:F3A1EDB6-27BF-4CE0-BB4C-(E-Mail Removed)...
> >>
> >> I have the same problem and it comes up with "The
> NDIS.VXD,
> >NTKERN.VXD device loaders could not load the device
> driver for the device
> >(code 2)."
> >>
> >> ----- Richard G. Harper wrote: -----
> >>
> >> When you highlight the card in Device Manager and
> select Properties,
> >what
> >> does that tell you about the problem with the card?
> >>
> >> --
> >> Richard G. Harper [MVP Win9x] (E-Mail Removed)
> >> * PLEASE post all messages and replies in the
> newsgroups
> >> * for the benefit of all. Private mail is usually
> not replied to.
> >> * HELP us help YOU ... http://www.dts-
> l.org/goodpost.htm
> >>
> >>
> >> "B" <(E-Mail Removed)> wrote in message
> >> news:buedom$(E-Mail Removed)...
> >> > Hi all,
> >> >> I have a computer using Win98 Second
> edition, and I have newly
> >> installed
> >> > a lan card into motherboard and startup windows
> 98, it can find the
> >lan
> >> card
> >> > and installed for me. However, after re-boot, an
> error message
> >about the
> >> Lan
> >> > card appeared. When I try to figure out the
> problem inside the
> >control
> >> > panel, I find that here is a "!" sign at the lan
> card. However,
> >when I
> >> plug
> >> > the network cable into the lan card, it show he
> proper light. I
> >have no
> >> idea
> >> > what is going on, can anyone help me?
> >> >>
> >
> >
> >.
> >

What?????

>-----Original Message-----
>Check the motherboard for leaking capacitors. This is a
known symptom.
>
>Carey
>
><(E-Mail Removed)> wrote in message
>news:3b7001c3dfcd$8f940c80$(E-Mail Removed)...
>> Steve's suggestion didn't work. Do you have any other
>> ideas?
>>
>> Thanks
>> >-----Original Message-----
>> >I see Steve has given you a suggestion, so try his
>> suggestion first.
>> >
>> >--
>> >Richard G. Harper [MVP Win9x] (E-Mail Removed)
>> >* PLEASE post all messages and replies in the
newsgroups
>> >* for the benefit of all. Private mail is usually not
>> replied to.
>> >* HELP us help YOU ... http://www.dts-
l.org/goodpost.htm
>> >
>> >
>> >"Graham" <(E-Mail Removed)> wrote in message
>> >news:F3A1EDB6-27BF-4CE0-BB4C-
(E-Mail Removed)...
>> >>
>> >> I have the same problem and it comes up
with "The
>> NDIS.VXD,
>> >NTKERN.VXD device loaders could not load the device
>> driver for the device
>> >(code 2)."
>> >>
>> >> ----- Richard G. Harper wrote: -----
>> >>
>> >> When you highlight the card in Device Manager
and
>> select Properties,
>> >what
>> >> does that tell you about the problem with the
card?
>> >>
>> >> --
>> >> Richard G. Harper [MVP Win9x]
(E-Mail Removed)
>> >> * PLEASE post all messages and replies in the
>> newsgroups
>> >> * for the benefit of all. Private mail is
usually
>> not replied to.
>> >> * HELP us help YOU ... http://www.dts-
>> l.org/goodpost.htm
>> >>
>> >>
>> >> "B" <(E-Mail Removed)> wrote in
message
>> >> news:buedom$(E-Mail Removed)...
>> >> > Hi all,
>> >> >> I have a computer using Win98 Second
>> edition, and I have newly
>> >> installed
>> >> > a lan card into motherboard and startup
windows
>> 98, it can find the
>> >lan
>> >> card
>> >> > and installed for me. However, after re-
boot, an
>> error message
>> >about the
>> >> Lan
>> >> > card appeared. When I try to figure out the
>> problem inside the
>> >control
>> >> > panel, I find that here is a "!" sign at the
lan
>> card. However,
>> >when I
>> >> plug
>> >> > the network cable into the lan card, it show
he
>> proper light. I
>> >have no
>> >> idea
>> >> > what is going on, can anyone help me?
>> >> >>
>> >
>> >
>> >.
>> >
>
>
>.
>