Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > cannot see other computers in workgroup

Reply
Thread Tools Display Modes

cannot see other computers in workgroup

 
 
fmpokane1
Guest
Posts: n/a

 
      04-24-2006, 03:43 PM
I have a T41 (IBM) laptop with integrated wireless. It shows that it
"connects" to the existing network, but neither the router (D-Link DI-624)
nor the IBM can ping each other. And the IBM cannot see the other computers
in the workgroup...pls help.
I called D-Link and they said that the issue is with Microsoft because their
equipment is working fine.
 
Reply With Quote
 
 
 
 
Lindsay
Guest
Posts: n/a

 
      04-24-2006, 09:58 PM
Have you tried working your way through the troubleshooter at
http://winhlp.com/wxnet.htm.
I have problems with my network, but found a few helpful things out from
this, and managed to get half my network working through it.

Lindsay

"fmpokane1" wrote:

> I have a T41 (IBM) laptop with integrated wireless. It shows that it
> "connects" to the existing network, but neither the router (D-Link DI-624)
> nor the IBM can ping each other. And the IBM cannot see the other computers
> in the workgroup...pls help.
> I called D-Link and they said that the issue is with Microsoft because their
> equipment is working fine.

 
Reply With Quote
 
Socrates
Guest
Posts: n/a

 
      04-25-2006, 09:29 PM
The "connection" is just that - nothing more.

You must run the network set up on both computers - then reboot - then select "view network Computers" Make sure that all computers have the same workgroup name.

www.amw1.com/faq




"Diamontina Cocktail" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
>
> "fmpokane1" <(E-Mail Removed)> wrote in message
> news:E7BBA522-018F-463C-BE8A-(E-Mail Removed)...
>>I have a T41 (IBM) laptop with integrated wireless. It shows that it
>> "connects" to the existing network, but neither the router (D-Link DI-624)
>> nor the IBM can ping each other. And the IBM cannot see the other
>> computers
>> in the workgroup...pls help.
>> I called D-Link and they said that the issue is with Microsoft because
>> their
>> equipment is working fine.

>
> First up, have you run the XP network setup wizard? You may well not have
> file sharing turned on but rather than confuse the issue, if you just read
> and follow the XP network setup wizard at each step, you shouldn't have any
> problems.
>
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't get 2 computers in same workgroup Terry Wireless Networks 14 12-21-2008 07:16 PM
Can't see workgroup computers Scientific Wireless Networks 1 09-13-2008 05:56 PM
Workgroup computers JohnD Wireless Networks 1 10-14-2007 06:16 PM
Can't see other computers in workgroup JMP Wireless Networks 3 04-29-2005 03:32 AM
Not seeing Computers on Workgroup Broadband Hardware 0 08-11-2004 09:46 PM



1 2 3 4 5 6 7 8 9 10 11