Cannot Renew or Release IP Information

Greetings,
Cable modem (Earthlink), Ethernet. Computer worked fine before move
(different ISP) connected to Internet via cable modem.
Stuck with the 169 IP address.
1. Tried renew/release IP info through winipcfg...get DHCP Server
unavailable Renaming adapter.
2. Tried renew/release through DOS window IPCONFIG command...same thing
I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
refuse to release/rest to allow Internet access thorugh cable modem.
Connection is good...using it now on different computer...
Any ideas would be much appreciated...
Thanx in advance

"Rich" <(E-Mail Removed)> wrote in message
news:A50D2389-0F65-410C-A8B6-(E-Mail Removed)...
> Greetings,
> Cable modem (Earthlink), Ethernet. Computer worked fine before move
> (different ISP) connected to Internet via cable modem.
> Stuck with the 169 IP address.
> 1. Tried renew/release IP info through winipcfg...get DHCP Server
> unavailable Renaming adapter.
> 2. Tried renew/release through DOS window IPCONFIG command...same thing
> I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
> refuse to release/rest to allow Internet access thorugh cable modem.
> Connection is good...using it now on different computer...
> Any ideas would be much appreciated...
> Thanx in advance


no router , just modem to the computer?

if you are getting a 169... address , your IP is not being assigned by the
modem.

try resetting your modem (then release/renew) and/or contact your ISP for
help.

ipconfig /release

ipconfig /renew

"Haggis" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
>
>
>
> "Rich" <(E-Mail Removed)> wrote in message
> news:A50D2389-0F65-410C-A8B6-(E-Mail Removed)...
>> Greetings,
>> Cable modem (Earthlink), Ethernet. Computer worked fine before move
>> (different ISP) connected to Internet via cable modem.
>> Stuck with the 169 IP address.
>> 1. Tried renew/release IP info through winipcfg...get DHCP Server
>> unavailable Renaming adapter.
>> 2. Tried renew/release through DOS window IPCONFIG command...same thing
>> I've gone through winipcfg, and through DOS window IPCONFIG...IP
>> addresses
>> refuse to release/rest to allow Internet access thorugh cable modem.
>> Connection is good...using it now on different computer...
>> Any ideas would be much appreciated...
>> Thanx in advance
>
>
> no router , just modem to the computer?
>
> if you are getting a 169... address , your IP is not being assigned by the
> modem.
>
> try resetting your modem (then release/renew) and/or contact your ISP for
> help.
>
> ipconfig /release
>
> ipconfig /renew
>
>

oops ..this is win98 ...ipconfig is for XP ...use winipcfg in win98

In article <A50D2389-0F65-410C-A8B6-(E-Mail Removed)>, Rich
<(E-Mail Removed)> wrote:
>Greetings,
>Cable modem (Earthlink), Ethernet. Computer worked fine before move
>(different ISP) connected to Internet via cable modem.
>Stuck with the 169 IP address.
>1. Tried renew/release IP info through winipcfg...get DHCP Server
>unavailable Renaming adapter.
>2. Tried renew/release through DOS window IPCONFIG command...same thing
>I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
>refuse to release/rest to allow Internet access thorugh cable modem.
>Connection is good...using it now on different computer...
>Any ideas would be much appreciated...
>Thanx in advance

Have you contacted your ISP for help? You might need to register your
cable modem with them, and they can confirm that your cable modem is
receiving a signal.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

In article <(E-Mail Removed)>, "Haggis"
<(E-Mail Removed)> wrote:
>>> Greetings,
>>> Cable modem (Earthlink), Ethernet. Computer worked fine before move
>>> (different ISP) connected to Internet via cable modem.
>>> Stuck with the 169 IP address.
>>> 1. Tried renew/release IP info through winipcfg...get DHCP Server
>>> unavailable Renaming adapter.
>>> 2. Tried renew/release through DOS window IPCONFIG command...same thing
>>> I've gone through winipcfg, and through DOS window IPCONFIG...IP
>>> addresses
>>> refuse to release/rest to allow Internet access thorugh cable modem.
>>> Connection is good...using it now on different computer...
>>> Any ideas would be much appreciated...
>>> Thanx in advance
>>
>> no router , just modem to the computer?
>>
>> if you are getting a 169... address , your IP is not being assigned by the
>> modem.
>>
>> try resetting your modem (then release/renew) and/or contact your ISP for
>> help.
>>
>> ipconfig /release
>>
>> ipconfig /renew
>
>oops ..this is win98 ...ipconfig is for XP ...use winipcfg in win98

Win98 has these commands, Haggis:

ipconfig /release_all

ipconfig /renew_all
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

Steve,
Thank you for the reply...
Tried and unsuccessful...
Suggestions??
Thanx,
Rich


"Steve Winograd [MVP]" wrote:

> In article <(E-Mail Removed)>, "Haggis"
> <(E-Mail Removed)> wrote:
> >>> Greetings,
> >>> Cable modem (Earthlink), Ethernet. Computer worked fine before move
> >>> (different ISP) connected to Internet via cable modem.
> >>> Stuck with the 169 IP address.
> >>> 1. Tried renew/release IP info through winipcfg...get DHCP Server
> >>> unavailable Renaming adapter.
> >>> 2. Tried renew/release through DOS window IPCONFIG command...same thing
> >>> I've gone through winipcfg, and through DOS window IPCONFIG...IP
> >>> addresses
> >>> refuse to release/rest to allow Internet access thorugh cable modem.
> >>> Connection is good...using it now on different computer...
> >>> Any ideas would be much appreciated...
> >>> Thanx in advance
> >>
> >> no router , just modem to the computer?
> >>
> >> if you are getting a 169... address , your IP is not being assigned by the
> >> modem.
> >>
> >> try resetting your modem (then release/renew) and/or contact your ISP for
> >> help.
> >>
> >> ipconfig /release
> >>
> >> ipconfig /renew
> >
> >oops ..this is win98 ...ipconfig is for XP ...use winipcfg in win98
>
> Win98 has these commands, Haggis:
>
> ipconfig /release_all
>
> ipconfig /renew_all
> --
> Best Wishes,
> Steve Winograd, MS-MVP (Windows Networking)
>
> Please post any reply as a follow-up message in the news group
> for everyone to see. I'm sorry, but I don't answer questions
> addressed directly to me in E-mail or news groups.
>
> Microsoft Most Valuable Professional - Windows Networking
> http://mvp.support.microsoft.com
>
> Steve Winograd's Networking FAQ
> http://www.bcmaven.com/networking/faq.htm
>

Steve,
Yes, cable modem is up and running...using XP laptop now on it. Just trying
to get my 98SE laptop to work on it (swapping laptops until I get a network).
Rich


"Steve Winograd [MVP]" wrote:

> In article <A50D2389-0F65-410C-A8B6-(E-Mail Removed)>, Rich
> <(E-Mail Removed)> wrote:
> >Greetings,
> >Cable modem (Earthlink), Ethernet. Computer worked fine before move
> >(different ISP) connected to Internet via cable modem.
> >Stuck with the 169 IP address.
> >1. Tried renew/release IP info through winipcfg...get DHCP Server
> >unavailable Renaming adapter.
> >2. Tried renew/release through DOS window IPCONFIG command...same thing
> >I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
> >refuse to release/rest to allow Internet access thorugh cable modem.
> >Connection is good...using it now on different computer...
> >Any ideas would be much appreciated...
> >Thanx in advance
>
> Have you contacted your ISP for help? You might need to register your
> cable modem with them, and they can confirm that your cable modem is
> receiving a signal.
> --
> Best Wishes,
> Steve Winograd, MS-MVP (Windows Networking)
>
> Please post any reply as a follow-up message in the news group
> for everyone to see. I'm sorry, but I don't answer questions
> addressed directly to me in E-mail or news groups.
>
> Microsoft Most Valuable Professional - Windows Networking
> http://mvp.support.microsoft.com
>
> Steve Winograd's Networking FAQ
> http://www.bcmaven.com/networking/faq.htm
>

In article <F62A0BA2-0580-499B-8F83-(E-Mail Removed)>, Rich
<(E-Mail Removed)> wrote:
>> >Greetings,
>> >Cable modem (Earthlink), Ethernet. Computer worked fine before move
>> >(different ISP) connected to Internet via cable modem.
>> >Stuck with the 169 IP address.
>> >1. Tried renew/release IP info through winipcfg...get DHCP Server
>> >unavailable Renaming adapter.
>> >2. Tried renew/release through DOS window IPCONFIG command...same thing
>> >I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
>> >refuse to release/rest to allow Internet access thorugh cable modem.
>> >Connection is good...using it now on different computer...
>> >Any ideas would be much appreciated...
>> >Thanx in advance
>>
>> Have you contacted your ISP for help? You might need to register your
>> cable modem with them, and they can confirm that your cable modem is
>> receiving a signal.
>
>Steve,
>Yes, cable modem is up and running...using XP laptop now on it. Just trying
>to get my 98SE laptop to work on it (swapping laptops until I get a network).
>Rich

After switching a cable modem from one computer to another, reset the
cable modem by unplugging it from the electrical power for a few
seconds and then plugging it back in.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

Steve,
You ARE the man...Am responding with the Win98SE computer now. It'll be
interesting if I have to unplug the modem should I want the XP machine
connected. Well, at least I feel "comfortable" about getting a wireless
network setup knowing that "everything works."
Thanx again,
Rich


"Steve Winograd [MVP]" wrote:

> In article <F62A0BA2-0580-499B-8F83-(E-Mail Removed)>, Rich
> <(E-Mail Removed)> wrote:
> >> >Greetings,
> >> >Cable modem (Earthlink), Ethernet. Computer worked fine before move
> >> >(different ISP) connected to Internet via cable modem.
> >> >Stuck with the 169 IP address.
> >> >1. Tried renew/release IP info through winipcfg...get DHCP Server
> >> >unavailable Renaming adapter.
> >> >2. Tried renew/release through DOS window IPCONFIG command...same thing
> >> >I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
> >> >refuse to release/rest to allow Internet access thorugh cable modem.
> >> >Connection is good...using it now on different computer...
> >> >Any ideas would be much appreciated...
> >> >Thanx in advance
> >>
> >> Have you contacted your ISP for help? You might need to register your
> >> cable modem with them, and they can confirm that your cable modem is
> >> receiving a signal.
> >
> >Steve,
> >Yes, cable modem is up and running...using XP laptop now on it. Just trying
> >to get my 98SE laptop to work on it (swapping laptops until I get a network).
> >Rich
>
> After switching a cable modem from one computer to another, reset the
> cable modem by unplugging it from the electrical power for a few
> seconds and then plugging it back in.
> --
> Best Wishes,
> Steve Winograd, MS-MVP (Windows Networking)
>
> Please post any reply as a follow-up message in the news group
> for everyone to see. I'm sorry, but I don't answer questions
> addressed directly to me in E-mail or news groups.
>
> Microsoft Most Valuable Professional - Windows Networking
> http://mvp.support.microsoft.com
>
> Steve Winograd's Networking FAQ
> http://www.bcmaven.com/networking/faq.htm
>

In article <04A07BD7-75E8-4B97-9A6E-(E-Mail Removed)>, Rich
<(E-Mail Removed)> wrote:
>> >> >Greetings,
>> >> >Cable modem (Earthlink), Ethernet. Computer worked fine before move
>> >> >(different ISP) connected to Internet via cable modem.
>> >> >Stuck with the 169 IP address.
>> >> >1. Tried renew/release IP info through winipcfg...get DHCP Server
>> >> >unavailable Renaming adapter.
>> >> >2. Tried renew/release through DOS window IPCONFIG command...same thing
>> >> >I've gone through winipcfg, and through DOS window IPCONFIG...IP addresses
>> >> >refuse to release/rest to allow Internet access thorugh cable modem.
>> >> >Connection is good...using it now on different computer...
>> >> >Any ideas would be much appreciated...
>> >> >Thanx in advance
>> >>
>> >> Have you contacted your ISP for help? You might need to register your
>> >> cable modem with them, and they can confirm that your cable modem is
>> >> receiving a signal.
>> >
>> >Steve,
>> >Yes, cable modem is up and running...using XP laptop now on it. Just trying
>> >to get my 98SE laptop to work on it (swapping laptops until I get a network).
>> >Rich
>>
>> After switching a cable modem from one computer to another, reset the
>> cable modem by unplugging it from the electrical power for a few
>> seconds and then plugging it back in.
>
>Steve,
>You ARE the man...Am responding with the Win98SE computer now. It'll be
>interesting if I have to unplug the modem should I want the XP machine
>connected. Well, at least I feel "comfortable" about getting a wireless
>network setup knowing that "everything works."
>Thanx again,
>Rich

You're welcome, Rich. Yes, you'll have to unplug the modem to switch
it back to the XP machine. Unplug it whenever you switch from one
machine to the other. Or get a broadband router, connect the cable
modem and both computers to it, and never have to switch anything
again.

I saw a cable modem today at a client's site where unplugging doesn't
do the trick. This cable modem provides both Internet access and
telephone service from Comcast, and it has a built-in battery to keep
it alive during a power failure. It has a recessed Reset button on
the back that you push when moving it from one computer to another.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm