Networking Forums

Networking Forums > Computer Networking > Windows Networking > Cannot join domain

Reply
Thread Tools Display Modes

Cannot join domain

 
 
Paul Smith
Guest
Posts: n/a

 
      12-29-2008, 01:33 PM
Cannot join domain

I have a computer setup as a domain controller with a primary DNS zone and
this is the configuration of the network cards installed in it:

Ethernet adapter PRIVATE:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 3Com 3C900TPO-based Ethernet Adapter
(Gen
eric)
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 151.142.22.79
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 151.142.22.79
161.155.22.25
161.155.22.26

Ethernet adapter PUBLIC:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
Connection
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.1
DNS Servers . . . . . . . . . . . :161.155.22.25
161.155.22.26
NetBIOS over Tcpip. . . . . . . . : Disabled


As can be seen, I have two network cards one set for the internal network
and the other to the external network. Also note that the IPs are not real
so that not to identify network. Also I removed the MACs for the same
purpose. I am trying to connect to the domain using this client, with the
following configurations:

Ethernet adapter Private:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
Ethe
rnet NIC
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 151.142.22.28
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 151.142.22.79
161.155.22.25
161.155.22.26

Ethernet adapter Public:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : ADMtek AN983 based ethernet
adapter
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.1
DNS Servers . . . . . . . . . . . : 161.155.22.25
161.155.22.26



I cannot join the domain with this client as it is giving this error :



Note: This information is intended for a network administrator. If you are
not your network's administrator, notify the administrator that you received
this information, which has been recorded in the file
C:\WINDOWS\debug\dcdiag.txt.

DNS was successfully queried for the service location (SRV) resource record
used to locate a domain controller for domain server-a.local:

The query was for the SRV record for _ldap._tcp.dc._msdcs.server-a.local

The following domain controllers were identified by the query:

testserver.mydomain.local

Common causes of this error include:

- Host (A) records that map the name of the domain controller to its IP
addresses are missing or contain incorrect addresses.

- Domain controllers registered in DNS are not connected to the network or
are not running.

For information about correcting this problem, click Help.


Your help is greatly appreciated!!


 
Reply With Quote
 
 
 
 
Robert L. \(MS-MVP\)
Guest
Posts: n/a

 
      12-29-2008, 01:56 PM
We have some issues with this configuration.

1. It is not recommended to setup DC on a multihomed computer.
2. We should use an internal DNS instead of ISP DNS.
3. I assume the public should be 10 IP range.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Paul Smith" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Cannot join domain
>
> I have a computer setup as a domain controller with a primary DNS zone and
> this is the configuration of the network cards installed in it:
>
> Ethernet adapter PRIVATE:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : 3Com 3C900TPO-based Ethernet Adapter
> (Gen
> eric)
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 151.142.22.79
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 151.142.22.79
> 161.155.22.25
> 161.155.22.26
>
> Ethernet adapter PUBLIC:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
> Connection
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 10.0.0.50
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 10.0.0.1
> DNS Servers . . . . . . . . . . . :161.155.22.25
> 161.155.22.26
> NetBIOS over Tcpip. . . . . . . . : Disabled
>
>
> As can be seen, I have two network cards one set for the internal network
> and the other to the external network. Also note that the IPs are not real
> so that not to identify network. Also I removed the MACs for the same
> purpose. I am trying to connect to the domain using this client, with the
> following configurations:
>
> Ethernet adapter Private:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
> Ethe
> rnet NIC
> Dhcp Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 151.142.22.28
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 151.142.22.79
> 161.155.22.25
> 161.155.22.26
>
> Ethernet adapter Public:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : ADMtek AN983 based ethernet
> adapter
> Dhcp Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 10.0.0.102
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 10.0.0.1
> DNS Servers . . . . . . . . . . . : 161.155.22.25
> 161.155.22.26
>
>
>
> I cannot join the domain with this client as it is giving this error :
>
>
>
> Note: This information is intended for a network administrator. If you
> are not your network's administrator, notify the administrator that you
> received this information, which has been recorded in the file
> C:\WINDOWS\debug\dcdiag.txt.
>
> DNS was successfully queried for the service location (SRV) resource
> record used to locate a domain controller for domain server-a.local:
>
> The query was for the SRV record for _ldap._tcp.dc._msdcs.server-a.local
>
> The following domain controllers were identified by the query:
>
> testserver.mydomain.local
>
> Common causes of this error include:
>
> - Host (A) records that map the name of the domain controller to its IP
> addresses are missing or contain incorrect addresses.
>
> - Domain controllers registered in DNS are not connected to the network or
> are not running.
>
> For information about correcting this problem, click Help.
>
>
> Your help is greatly appreciated!!
>


 
Reply With Quote
 
Meinolf Weber [MVP-DS]
Guest
Posts: n/a

 
      12-29-2008, 02:27 PM
Hello Paul,

See my answer in microsoft.public.windows.server.active_directory and please
use crossposting with a newsreader like outlokk express. This prevents you
and others to collect/read all answers and maybe you get more then once the
same.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Cannot join domain
>
> I have a computer setup as a domain controller with a primary DNS zone
> and this is the configuration of the network cards installed in it:
>
> Ethernet adapter PRIVATE:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : 3Com 3C900TPO-based Ethernet
> Adapter
> (Gen
> eric)
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 151.142.22.79
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 151.142.22.79
> 161.155.22.25
> 161.155.22.26
> Ethernet adapter PUBLIC:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
> Connection
> DHCP Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 10.0.0.50
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 10.0.0.1
> DNS Servers . . . . . . . . . . . :161.155.22.25
> 161.155.22.26
> NetBIOS over Tcpip. . . . . . . . : Disabled
> As can be seen, I have two network cards one set for the internal
> network and the other to the external network. Also note that the IPs
> are not real so that not to identify network. Also I removed the MACs
> for the same purpose. I am trying to connect to the domain using this
> client, with the following configurations:
>
> Ethernet adapter Private:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : Realtek RTL8139 Family PCI
> Fast
> Ethe
> rnet NIC
> Dhcp Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 151.142.22.28
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
> Default Gateway . . . . . . . . . :
> DNS Servers . . . . . . . . . . . : 151.142.22.79
> 161.155.22.25
> 161.155.22.26
> Ethernet adapter Public:
>
> Connection-specific DNS Suffix . :
> Description . . . . . . . . . . . : ADMtek AN983 based
> ethernet
> adapter
> Dhcp Enabled. . . . . . . . . . . : No
> IP Address. . . . . . . . . . . . : 10.0.0.102
> Subnet Mask . . . . . . . . . . . : 255.255.255.0
> Default Gateway . . . . . . . . . : 10.0.0.1
> DNS Servers . . . . . . . . . . . : 161.155.22.25
> 161.155.22.26
> I cannot join the domain with this client as it is giving this error :
>
> Note: This information is intended for a network administrator. If
> you are not your network's administrator, notify the administrator
> that you received this information, which has been recorded in the
> file C:\WINDOWS\debug\dcdiag.txt.
>
> DNS was successfully queried for the service location (SRV) resource
> record used to locate a domain controller for domain server-a.local:
>
> The query was for the SRV record for
> _ldap._tcp.dc._msdcs.server-a.local
>
> The following domain controllers were identified by the query:
>
> testserver.mydomain.local
>
> Common causes of this error include:
>
> - Host (A) records that map the name of the domain controller to its
> IP addresses are missing or contain incorrect addresses.
>
> - Domain controllers registered in DNS are not connected to the
> network or are not running.
>
> For information about correcting this problem, click Help.
>
> Your help is greatly appreciated!!
>



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot join domain...very odd MLT-TECH Windows Networking 4 05-21-2009 03:13 PM
Clients can't join domain-new Primary Domain Controller installed blinton25 Windows Networking 7 06-23-2008 09:58 PM
Cannot join domain Per Elmsäter Windows Networking 22 02-17-2006 12:36 PM
Help - How to Join Domain Mocacius Windows Networking 3 11-08-2005 06:16 PM
join w98 to a domain adrian916 Windows Networking 3 10-03-2003 11:14 AM



1 2 3 4 5 6 7 8 9 10 11