Cannot access Base Management tool

hi,
i have a problem that i cannot access the base management
tool from the toolbar (greyed out) nor through a browser
via http://192.168.2.1 (cannot find server error)

does anyone have any idea how i can access my base
management tool?
i have the latest hardware firmware, and using XP SP1.

Did you change the LAN IP address of the router?

Are you running on a different TCP/IP network the the router is on?

Callum wrote:

> hi,
> i have a problem that i cannot access the base management
> tool from the toolbar (greyed out) nor through a browser
> via http://192.168.2.1 (cannot find server error)
>
> does anyone have any idea how i can access my base
> management tool?
> i have the latest hardware firmware, and using XP SP1.

Thanks for replying.
LAst weekend i was having connection problems, and my set
up was DSL modem -> Router -> MN-700 -> desktop PC, so i
took off the Router and now i always get a connection, but
cant access the Base Management Tool - so i guess i did
change the LAN IP address ~ or sufficiently confused it.

do you suggest i do a ipconfig /release and /renew? i
only tried to access this morning before work and didnt
try too many things - except write to the Newsgroup
Any suggestion on checking the LAN IP address, i didnt
purposfully go and change the 192.168.2.1 thing.

I dont think i am running on a different TCP/IP network.
my set up is as above.

Oh, BTW, it isnt XP, its W2kPro im using at home, latest SP

Any help will be great, thanks!

>-----Original Message-----
>Did you change the LAN IP address of the router?
>
>Are you running on a different TCP/IP network the the
router is on?
>
>Callum wrote:
>
>> hi,
>> i have a problem that i cannot access the base
management
>> tool from the toolbar (greyed out) nor through a
browser
>> via http://192.168.2.1 (cannot find server error)
>>
>> does anyone have any idea how i can access my base
>> management tool?
>> i have the latest hardware firmware, and using XP SP1.
>
>.
>

I have had a similar problem and to get around it I
temporarily disabled my XP firewall.
That did the trick.
>-----Original Message-----
>Did you change the LAN IP address of the router?
>
>Are you running on a different TCP/IP network the the
router is on?
>
>Callum wrote:
>
>> hi,
>> i have a problem that i cannot access the base
management
>> tool from the toolbar (greyed out) nor through a
browser
>> via http://192.168.2.1 (cannot find server error)
>>
>> does anyone have any idea how i can access my base
>> management tool?
>> i have the latest hardware firmware, and using XP SP1.
>
>.
>

Thanks Steve, i made a mistake, my home PC has W2K Pro
installed. See my later email (Follow up to "joker")
about my setup.
cheers

>-----Original Message-----
>I have had a similar problem and to get around it I
>temporarily disabled my XP firewall.
>That did the trick.
>>-----Original Message-----
>>Did you change the LAN IP address of the router?
>>
>>Are you running on a different TCP/IP network the the
>router is on?
>>
>>Callum wrote:
>>
>>> hi,
>>> i have a problem that i cannot access the base
>management
>>> tool from the toolbar (greyed out) nor through a
>browser
>>> via http://192.168.2.1 (cannot find server error)
>>>
>>> does anyone have any idea how i can access my base
>>> management tool?
>>> i have the latest hardware firmware, and using XP SP1.
>>
>>.
>>
>.
>

Did you change the MN-700 out of router mode into access point mode?

If you didi that the MN-700 becomes a DHCP client. If it is assigned an
IP address you can browse to either that or the name that you assigned
to the MN-700.

Callum wrote:

> Thanks for replying.
> LAst weekend i was having connection problems, and my set
> up was DSL modem -> Router -> MN-700 -> desktop PC, so i
> took off the Router and now i always get a connection, but
> cant access the Base Management Tool - so i guess i did
> change the LAN IP address ~ or sufficiently confused it.
>
> do you suggest i do a ipconfig /release and /renew? i
> only tried to access this morning before work and didnt
> try too many things - except write to the Newsgroup
> Any suggestion on checking the LAN IP address, i didnt
> purposfully go and change the 192.168.2.1 thing.
>
> I dont think i am running on a different TCP/IP network.
> my set up is as above.
>
> Oh, BTW, it isnt XP, its W2kPro im using at home, latest SP
>
> Any help will be great, thanks!
>
>
>>-----Original Message-----
>>Did you change the LAN IP address of the router?
>>
>>Are you running on a different TCP/IP network the the
>
> router is on?
>
>>Callum wrote:
>>
>>
>>>hi,
>>>i have a problem that i cannot access the base
>
> management
>
>>>tool from the toolbar (greyed out) nor through a
>
> browser
>
>>>via http://192.168.2.1 (cannot find server error)
>>>
>>>does anyone have any idea how i can access my base
>>>management tool?
>>>i have the latest hardware firmware, and using XP SP1.
>>
>>.
>>