Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > can not reconnect my network

Reply
Thread Tools Display Modes

can not reconnect my network

 
 
Bob S
Guest
Posts: n/a

 
      10-19-2004, 10:41 PM
I have mirosoft 500 wireless modem. It worked great at my
last place connected to an old moden for dsl. I have
moved recently and tried to connect to a new dsl moden
using the same base station computer and lap tops but it
won't connect. SBC guy says I need to reset my wireless
modem or change password or something .. Don't know how
to go about it any help??? out there thanks
 
Reply With Quote
 
 
 
 
Joker
Guest
Posts: n/a

 
      10-20-2004, 12:05 AM
You need to change your settings in the WAN page of the router. If you
changed ISP's then all the information over there might have changed. I
bet that is what they are talking about.

Bob S wrote:

> I have mirosoft 500 wireless modem. It worked great at my
> last place connected to an old moden for dsl. I have
> moved recently and tried to connect to a new dsl moden
> using the same base station computer and lap tops but it
> won't connect. SBC guy says I need to reset my wireless
> modem or change password or something .. Don't know how
> to go about it any help??? out there thanks


--
Please do not contact me directly or ask me to contact you directly for
assistance.

If your question is worth asking, it's worth posting.

If it’s not worth posting you should have done a search on
http://www.google.com/ http://www.google.com/grphp?hl=en&tab=wg&q= or
http://news.google.com/froogle?hl=en&tab=nf&ned=us&q= before wasting our
time.
 
Reply With Quote
 
Chris H.
Guest
Posts: n/a

 
      10-20-2004, 03:59 AM
If the connection is PPPoE, you must type your user name in the form user
(E-Mail Removed) or user (E-Mail Removed). Make sure your settings are
revised on the base station, or else it won't talk to your ISP.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone


"Bob S" <(E-Mail Removed)> wrote in message
news:157601c4b62c$b8de01f0$(E-Mail Removed)...
>I have mirosoft 500 wireless modem. It worked great at my
> last place connected to an old moden for dsl. I have
> moved recently and tried to connect to a new dsl moden
> using the same base station computer and lap tops but it
> won't connect. SBC guy says I need to reset my wireless
> modem or change password or something .. Don't know how
> to go about it any help??? out there thanks



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to reconnect one computer to a network? ilyaz Wireless Networks 8 05-03-2008 03:27 AM
Adhoc network wont reconnect unless computers restarted. plastikaa Wireless Networks 0 07-28-2005 08:06 AM
Avoid user answer 'NO' where or not to reconnect to the network dr =?Utf-8?B?YW5keQ==?= Windows Networking 2 03-17-2005 03:23 PM
SOCALWUG Meeting Tomorrow 7pm Post-Tsunami Reconnect Relief and LA Wireless Research Network Frank Wireless Internet 1 01-26-2005 04:29 PM
Windows 2000 Network Drive reconnect Andreas I. Windows Networking 2 01-25-2005 05:54 PM



1 2 3 4 5 6 7 8 9 10 11