How can I fix IP Address to Dial-in or VPN User in W2K3

Hi, all.

If you please, I would like to know, how to if IP Address
to Dial-in or VPN User in W2K3.

In W2K, I can fix it under user account in Dial-in Tab
but in W2K3 it's gray T_T.

Thank you in advance

Dekngo

Hi,

If you raise domain functionality level to Windows 2003, you will be able to
assign fix IP addresses... (The window won't be grayed out any more).

Before you do this, make sure that all your domain controllers are running
Windows server 2003!

Mike

"dekngo" <(E-Mail Removed)> wrote in message
news:384e01c4a92e$5595b1c0$(E-Mail Removed)...
> Hi, all.
>
> If you please, I would like to know, how to if IP Address
> to Dial-in or VPN User in W2K3.
>
> In W2K, I can fix it under user account in Dial-in Tab
> but in W2K3 it's gray T_T.
>
> Thank you in advance
>
> Dekngo

Thank you very much Miha.

But in my network have only one server, w2k3, with many
OS, w98, w2k, wxp there is no more w2k AD server.

Thank you in advance.

Dekngo


>-----Original Message-----
>Hi,
>
>If you raise domain functionality level to Windows 2003,
you will be able to
>assign fix IP addresses... (The window won't be grayed
out any more).
>
>Before you do this, make sure that all your domain
controllers are running
>Windows server 2003!
>
>Mike
>
>"dekngo" <(E-Mail Removed)> wrote in message
>news:384e01c4a92e$5595b1c0$(E-Mail Removed)...
>> Hi, all.
>>
>> If you please, I would like to know, how to if IP
Address
>> to Dial-in or VPN User in W2K3.
>>
>> In W2K, I can fix it under user account in Dial-in Tab
>> but in W2K3 it's gray T_T.
>>
>> Thank you in advance
>>
>> Dekngo
>
>
>.
>

If you only have Windows 2003 domain controllers, then there is nothing
stopping you from raising domain functional level... After you raise this
level to Windows Server 2003, you will be able to assign fix IP to users
under Dial-In tab...

Also, if I understand you correctly, you only have on DC. You should have at
least two domain controllers in every domain. It is quite hard to restore
domain environment if you only have one domain controller in your domain
(e.g. restore from tape)...

Mike

"Dekngo" <(E-Mail Removed)> wrote in message
news:387401c4a933$55eabd50$(E-Mail Removed)...
> Thank you very much Miha.
>
> But in my network have only one server, w2k3, with many
> OS, w98, w2k, wxp there is no more w2k AD server.
>
> Thank you in advance.
>
> Dekngo
>
>
> >-----Original Message-----
> >Hi,
> >
> >If you raise domain functionality level to Windows 2003,
> you will be able to
> >assign fix IP addresses... (The window won't be grayed
> out any more).
> >
> >Before you do this, make sure that all your domain
> controllers are running
> >Windows server 2003!
> >
> >Mike
> >
> >"dekngo" <(E-Mail Removed)> wrote in message
> >news:384e01c4a92e$5595b1c0$(E-Mail Removed)...
> >> Hi, all.
> >>
> >> If you please, I would like to know, how to if IP
> Address
> >> to Dial-in or VPN User in W2K3.
> >>
> >> In W2K, I can fix it under user account in Dial-in Tab
> >> but in W2K3 it's gray T_T.
> >>
> >> Thank you in advance
> >>
> >> Dekngo
> >
> >
> >.
> >

Thank you krub.


>-----Original Message-----
>If you only have Windows 2003 domain controllers, then
there is nothing
>stopping you from raising domain functional level...
After you raise this
>level to Windows Server 2003, you will be able to assign
fix IP to users
>under Dial-In tab...
>
>Also, if I understand you correctly, you only have on
DC. You should have at
>least two domain controllers in every domain. It is
quite hard to restore
>domain environment if you only have one domain
controller in your domain
>(e.g. restore from tape)...
>
>Mike
>
>"Dekngo" <(E-Mail Removed)> wrote in message
>news:387401c4a933$55eabd50$(E-Mail Removed)...
>> Thank you very much Miha.
>>
>> But in my network have only one server, w2k3, with many
>> OS, w98, w2k, wxp there is no more w2k AD server.
>>
>> Thank you in advance.
>>
>> Dekngo
>>
>>
>> >-----Original Message-----
>> >Hi,
>> >
>> >If you raise domain functionality level to Windows
2003,
>> you will be able to
>> >assign fix IP addresses... (The window won't be grayed
>> out any more).
>> >
>> >Before you do this, make sure that all your domain
>> controllers are running
>> >Windows server 2003!
>> >
>> >Mike
>> >
>> >"dekngo" <(E-Mail Removed)> wrote in message
>> >news:384e01c4a92e$5595b1c0$(E-Mail Removed)...
>> >> Hi, all.
>> >>
>> >> If you please, I would like to know, how to if IP
>> Address
>> >> to Dial-in or VPN User in W2K3.
>> >>
>> >> In W2K, I can fix it under user account in Dial-in
Tab
>> >> but in W2K3 it's gray T_T.
>> >>
>> >> Thank you in advance
>> >>
>> >> Dekngo
>> >
>> >
>> >.
>> >
>
>
>.
>