Networking Forums

Networking Forums > Network Hardware > Network Routers > Can anyone explain connection paradox

Reply
Thread Tools Display Modes

Can anyone explain connection paradox

 
 
Barry
Guest
Posts: n/a

 
      09-25-2006, 12:46 PM
Can anyone tell me how it is possible to have a network connection yet not
be able to use OE or IE. Most of the time my connection is fine but I get
the above phenomena occasionally, particularly when the connection is not
being used. I thought I would be able to have the router permanently on and
connect around the house when I want to.
If I switch the router off and on again the connection works normally again.
I often find that I cannot connect to the router setup screen when in this
condition, if I could I could restsrt the router from there.
My ISP is Kingston Communications and a sthey have a monopoly in this area
they are not rated very highly for performance. is it possible that
contention (i.e. too many connections on one node) is the cause. Perhaps
they disconnect me if there is no traffic?


 
Reply With Quote
 
 
 
 
Tieske
Guest
Posts: n/a

 
      09-28-2006, 09:06 PM
I don't get the exact problem.... The router is your own router in your home
network? or the one from the provider giving you internet access?

Anyways; if the connection from your PC to the router fails, then I would
first check on a firmware upgrade for that router. Sounds like that one
crashes.
If the connection from the router to the internet fails, try to check for
settings to "keep alive", many routers/modems provide this functionality. If
this fails try using allways-on-network-software like MSN Messenger for
example, it stays connected and sends some data once in a while, this will
provide for a keep-alive as well.

Tieske


"Barry" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Can anyone tell me how it is possible to have a network connection yet not
> be able to use OE or IE. Most of the time my connection is fine but I get
> the above phenomena occasionally, particularly when the connection is not
> being used. I thought I would be able to have the router permanently on
> and connect around the house when I want to.
> If I switch the router off and on again the connection works normally
> again.
> I often find that I cannot connect to the router setup screen when in this
> condition, if I could I could restsrt the router from there.
> My ISP is Kingston Communications and a sthey have a monopoly in this area
> they are not rated very highly for performance. is it possible that
> contention (i.e. too many connections on one node) is the cause. Perhaps
> they disconnect me if there is no traffic?
>



 
Reply With Quote
 
Barry
Guest
Posts: n/a

 
      09-30-2006, 10:21 PM
Thanks for the tips. It didn't happen this Saturday which is usually the
worst night. I will play with some of your suggestions, many thanks for the
help.
The Router is a Netgear which is on the ISP approved list but is mine.
Barry

"Tieske" <(E-Mail Removed)> wrote in message
news:451c393a$0$38802$(E-Mail Removed)...
>I don't get the exact problem.... The router is your own router in your
>home network? or the one from the provider giving you internet access?
>
> Anyways; if the connection from your PC to the router fails, then I would
> first check on a firmware upgrade for that router. Sounds like that one
> crashes.
> If the connection from the router to the internet fails, try to check for
> settings to "keep alive", many routers/modems provide this functionality.
> If this fails try using allways-on-network-software like MSN Messenger for
> example, it stays connected and sends some data once in a while, this will
> provide for a keep-alive as well.
>
> Tieske
>
>
> "Barry" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Can anyone tell me how it is possible to have a network connection yet
>> not be able to use OE or IE. Most of the time my connection is fine but I
>> get the above phenomena occasionally, particularly when the connection is
>> not being used. I thought I would be able to have the router permanently
>> on and connect around the house when I want to.
>> If I switch the router off and on again the connection works normally
>> again.
>> I often find that I cannot connect to the router setup screen when in
>> this condition, if I could I could restsrt the router from there.
>> My ISP is Kingston Communications and a sthey have a monopoly in this
>> area they are not rated very highly for performance. is it possible that
>> contention (i.e. too many connections on one node) is the cause. Perhaps
>> they disconnect me if there is no traffic?
>>

>
>



 
Reply With Quote
 
Ray Taylor
Guest
Posts: n/a

 
      10-01-2006, 10:27 AM
Are you using any torrent software at the same time.
Torrent software and some p2p programs will overload many cheaper routers
with connection attempts and they will crash - then needing to be restarted.

If you are, try setting your bit torrent client to use no more than 90
connections at a time. I know azureus allows you to do this. The router
crashing will explain why you cannot connect to its setup interface over the
network and has nothing to do with the ISP.




"Barry" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Thanks for the tips. It didn't happen this Saturday which is usually the
> worst night. I will play with some of your suggestions, many thanks for
> the help.
> The Router is a Netgear which is on the ISP approved list but is mine.
> Barry
>
> "Tieske" <(E-Mail Removed)> wrote in message
> news:451c393a$0$38802$(E-Mail Removed)...
>>I don't get the exact problem.... The router is your own router in your
>>home network? or the one from the provider giving you internet access?
>>
>> Anyways; if the connection from your PC to the router fails, then I would
>> first check on a firmware upgrade for that router. Sounds like that one
>> crashes.
>> If the connection from the router to the internet fails, try to check for
>> settings to "keep alive", many routers/modems provide this functionality.
>> If this fails try using allways-on-network-software like MSN Messenger
>> for example, it stays connected and sends some data once in a while, this
>> will provide for a keep-alive as well.
>>
>> Tieske
>>
>>
>> "Barry" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> Can anyone tell me how it is possible to have a network connection yet
>>> not be able to use OE or IE. Most of the time my connection is fine but
>>> I get the above phenomena occasionally, particularly when the connection
>>> is not being used. I thought I would be able to have the router
>>> permanently on and connect around the house when I want to.
>>> If I switch the router off and on again the connection works normally
>>> again.
>>> I often find that I cannot connect to the router setup screen when in
>>> this condition, if I could I could restsrt the router from there.
>>> My ISP is Kingston Communications and a sthey have a monopoly in this
>>> area they are not rated very highly for performance. is it possible that
>>> contention (i.e. too many connections on one node) is the cause. Perhaps
>>> they disconnect me if there is no traffic?
>>>

>>
>>

>
>



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Connection paradox Barry Home Networking 7 09-30-2006 10:18 PM
Please explain news.demon.nl Windows Networking 1 05-14-2006 07:09 PM
Wireless Performance Paradox on Thinkpad T42p Sid Joyner Wireless Internet 0 09-06-2005 01:00 AM
tcp: can't explain that Stephan Absmeier Linux Networking 3 09-24-2003 06:08 PM
Please explain this!!! Tugrul Wireless Internet 2 07-09-2003 07:25 PM



1 2 3 4 5 6 7 8 9 10 11