cabling a network

What is the proper type of cable to use when connecting a server to a
switch?

We are using HP servers, connecting them to a 3COM 4500 switch, can i
use stright through cables or do i need to use a crossover cable?

Thanks in advance

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> What is the proper type of cable to use when connecting a server to a
> switch?
>
> We are using HP servers, connecting them to a 3COM 4500 switch, can i
> use stright through cables or do i need to use a crossover cable?
>
> Thanks in advance
>

I use 568B myself as it seems to be the most common

http://www.ablecables.com.au/568avb.htm

but the switch should handle either (auto switch)

In article <(E-Mail Removed) .com>,
(E-Mail Removed) wrote:
>What is the proper type of cable to use when connecting a server to a
>switch?
>
>We are using HP servers, connecting them to a 3COM 4500 switch, can i
>use stright through cables or do i need to use a crossover cable?
>
>Thanks in advance

The 3COM 4500 has auto-sensing (MDI/MDIX) ports that can connect to a
server using either type of cable. However, standard practice is to
connect a server to a switch using a straight cable.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm