Networking Forums

Networking Forums > Network Hardware > Network Routers > cable modem at dialup speed through Linksys router

Reply
Thread Tools Display Modes

cable modem at dialup speed through Linksys router

 
 
Steve
Guest
Posts: n/a

 
      08-18-2005, 09:52 PM
I have a cable modem (optimum online) and a Linksys BEFSR81 router, and a
small bunch of Win XP PCs. After many months of trouble-free service,
suddenly I find that the internet is coming in at a slow dialup speed - but
only when I have the router inline. When I go direct from the cable modem
to a PC, it works fine - 600kB/sec. What's going on? I have rebooted the
cable modem and the router umpteen times to no avail. Sometimes it doesn't
work at all! When it dies altogether I go to the router's control panel and
do a DCHP release and renew, which brings it back (to dialup speed!).

Thanks in advance,
Steve


 
Reply With Quote
 
 
 
 
Quaoar
Guest
Posts: n/a

 
      08-19-2005, 02:03 AM
Steve wrote:
> I have a cable modem (optimum online) and a Linksys BEFSR81 router,
> and a small bunch of Win XP PCs. After many months of trouble-free
> service, suddenly I find that the internet is coming in at a slow
> dialup speed - but only when I have the router inline. When I go
> direct from the cable modem to a PC, it works fine - 600kB/sec. What's
> going on? I have rebooted the cable modem and the router
> umpteen times to no avail. Sometimes it doesn't work at all! When
> it dies altogether I go to the router's control panel and do a DCHP
> release and renew, which brings it back (to dialup speed!).
> Thanks in advance,
> Steve


You have numerous PCs sharing the internet connection. Each PC eats
some of the total bandwidth, and if even one is using much of the more
valuable upstream (uploading via P2P) the rest of the system can become
dead in the water. This will go away when you are directly connected
for obvious reasons.

Q


 
Reply With Quote
 
Steve
Guest
Posts: n/a

 
      08-19-2005, 03:43 PM
No, this is not it. At the moment I have ONE PC on the router, and my speed
is 2 kB/sec, which of course is the same as a bad dialup connection, not a
cable modem speed. I am using a test download file from my cable provider
as my speed check.

My speed should be 600kB per second, not 2.


"Quaoar" <(E-Mail Removed)> wrote in message
news:g_ydnfO_EdSTo5jeRVn-(E-Mail Removed)...
> Steve wrote:
>> I have a cable modem (optimum online) and a Linksys BEFSR81 router,
>> and a small bunch of Win XP PCs. After many months of trouble-free
>> service, suddenly I find that the internet is coming in at a slow
>> dialup speed - but only when I have the router inline. When I go
>> direct from the cable modem to a PC, it works fine - 600kB/sec. What's
>> going on? I have rebooted the cable modem and the router
>> umpteen times to no avail. Sometimes it doesn't work at all! When
>> it dies altogether I go to the router's control panel and do a DCHP
>> release and renew, which brings it back (to dialup speed!).
>> Thanks in advance,
>> Steve

>
> You have numerous PCs sharing the internet connection. Each PC eats some
> of the total bandwidth, and if even one is using much of the more valuable
> upstream (uploading via P2P) the rest of the system can become dead in the
> water. This will go away when you are directly connected for obvious
> reasons.
>
> Q
>



 
Reply With Quote
 
Steve
Guest
Posts: n/a

 
      08-19-2005, 07:34 PM
I cannot say that I understand what caused my problem, but I resolved it by
swapping out the router to a Linksys Wireless-G four-port router. It, too,
did not work at first as described below. I used the reset button (held it
in until the lights started blinking) then everything was suddenly A-OK.

If anyone can tell me what the heck happened, and why it is better now, I
would love to hear it. BTW, I can say that I am pretty sure I did not mess
with any of the settings available in the router's control panel...

"Steve" <(E-Mail Removed)> wrote in message
news:xwnNe.152$(E-Mail Removed)...
> No, this is not it. At the moment I have ONE PC on the router, and my

speed
> is 2 kB/sec, which of course is the same as a bad dialup connection, not a
> cable modem speed. I am using a test download file from my cable provider
> as my speed check.
>
> My speed should be 600kB per second, not 2.
>
>
> "Quaoar" <(E-Mail Removed)> wrote in message
> news:g_ydnfO_EdSTo5jeRVn-(E-Mail Removed)...
> > Steve wrote:
> >> I have a cable modem (optimum online) and a Linksys BEFSR81 router,
> >> and a small bunch of Win XP PCs. After many months of trouble-free
> >> service, suddenly I find that the internet is coming in at a slow
> >> dialup speed - but only when I have the router inline. When I go
> >> direct from the cable modem to a PC, it works fine - 600kB/sec. What's
> >> going on? I have rebooted the cable modem and the router
> >> umpteen times to no avail. Sometimes it doesn't work at all! When
> >> it dies altogether I go to the router's control panel and do a DCHP
> >> release and renew, which brings it back (to dialup speed!).
> >> Thanks in advance,
> >> Steve

> >
> > You have numerous PCs sharing the internet connection. Each PC eats

some
> > of the total bandwidth, and if even one is using much of the more

valuable
> > upstream (uploading via P2P) the rest of the system can become dead in

the
> > water. This will go away when you are directly connected for obvious
> > reasons.
> >
> > Q
> >

>
>



 
Reply With Quote
 
Quaoar
Guest
Posts: n/a

 
      08-20-2005, 03:38 PM
Steve wrote:
> I cannot say that I understand what caused my problem, but I resolved
> it by swapping out the router to a Linksys Wireless-G four-port
> router. It, too, did not work at first as described below. I used
> the reset button (held it in until the lights started blinking) then
> everything was suddenly A-OK.
>
> If anyone can tell me what the heck happened, and why it is better
> now, I would love to hear it. BTW, I can say that I am pretty sure I
> did not mess with any of the settings available in the router's
> control panel...
>
> "Steve" <(E-Mail Removed)> wrote in message
> news:xwnNe.152$(E-Mail Removed)...
>> No, this is not it. At the moment I have ONE PC on the router, and
>> my speed is 2 kB/sec, which of course is the same as a bad dialup
>> connection, not a cable modem speed. I am using a test download
>> file from my cable provider as my speed check.
>>
>> My speed should be 600kB per second, not 2.
>>
>>
>> "Quaoar" <(E-Mail Removed)> wrote in message
>> news:g_ydnfO_EdSTo5jeRVn-(E-Mail Removed)...
>>> Steve wrote:
>>>> I have a cable modem (optimum online) and a Linksys BEFSR81 router,
>>>> and a small bunch of Win XP PCs. After many months of trouble-free
>>>> service, suddenly I find that the internet is coming in at a slow
>>>> dialup speed - but only when I have the router inline. When I go
>>>> direct from the cable modem to a PC, it works fine - 600kB/sec.
>>>> What's going on? I have rebooted the cable modem and the router
>>>> umpteen times to no avail. Sometimes it doesn't work at all! When
>>>> it dies altogether I go to the router's control panel and do a DCHP
>>>> release and renew, which brings it back (to dialup speed!).
>>>> Thanks in advance,
>>>> Steve
>>>
>>> You have numerous PCs sharing the internet connection. Each PC
>>> eats some of the total bandwidth, and if even one is using much of
>>> the more valuable upstream (uploading via P2P) the rest of the
>>> system can become dead in the water. This will go away when you
>>> are directly connected for obvious reasons.
>>>
>>> Q


Bad router? Any time you swap the device (computer, router) connected
to the modem, it is best to reset the modem to clear its on-board MAC
address table. Most ISPs allow only one MAC address connected to the
modem and when it changes when you swap devices, that address must be
cleared to allow the new equipment.


 
Reply With Quote
 
Travis
Guest
Posts: n/a

 
      08-20-2005, 06:00 PM
Quaoar wrote:
> Steve wrote:
> > I cannot say that I understand what caused my problem, but I
> > resolved it by swapping out the router to a Linksys Wireless-G
> > four-port router. It, too, did not work at first as described
> > below. I used the reset button (held it in until the lights
> > started blinking) then everything was suddenly A-OK.
> >
> > If anyone can tell me what the heck happened, and why it is better
> > now, I would love to hear it. BTW, I can say that I am pretty
> > sure I did not mess with any of the settings available in the
> > router's control panel...
> >
> > "Steve" <(E-Mail Removed)> wrote in message
> > news:xwnNe.152$(E-Mail Removed)...
> > > No, this is not it. At the moment I have ONE PC on the router,
> > > and my speed is 2 kB/sec, which of course is the same as a bad
> > > dialup connection, not a cable modem speed. I am using a test
> > > download file from my cable provider as my speed check.
> > >
> > > My speed should be 600kB per second, not 2.
> > >
> > >
> > > "Quaoar" <(E-Mail Removed)> wrote in message
> > > news:g_ydnfO_EdSTo5jeRVn-(E-Mail Removed)...
> > > > Steve wrote:
> > > > > I have a cable modem (optimum online) and a Linksys BEFSR81
> > > > > router, and a small bunch of Win XP PCs. After many months
> > > > > of trouble-free service, suddenly I find that the internet
> > > > > is coming in at a slow dialup speed - but only when I have
> > > > > the router inline. When I go direct from the cable modem
> > > > > to a PC, it works fine - 600kB/sec. What's going on? I
> > > > > have rebooted the cable modem and the router umpteen times
> > > > > to no avail. Sometimes it doesn't work at all! When it
> > > > > dies altogether I go to the router's control panel and do a
> > > > > DCHP release and renew, which brings it back (to dialup
> > > > > speed!). Thanks in advance,
> > > > > Steve
> > > >
> > > > You have numerous PCs sharing the internet connection. Each
> > > > PC eats some of the total bandwidth, and if even one is using
> > > > much of the more valuable upstream (uploading via P2P) the
> > > > rest of the system can become dead in the water. This will
> > > > go away when you are directly connected for obvious reasons.
> > > >
> > > > Q

>
> Bad router? Any time you swap the device (computer, router)
> connected to the modem, it is best to reset the modem to clear its
> on-board MAC address table. Most ISPs allow only one MAC address
> connected to the modem and when it changes when you swap devices,
> that address must be cleared to allow the new equipment.


Swapping out the router has nothing to do with what MAC address the ISP
sees.

--


Travis in Shoreline Washington

 
Reply With Quote
 
Peterken
Guest
Posts: n/a

 
      08-20-2005, 06:20 PM
Swapping the router DOES matter, since every router has its own default MAC
address...
Usually (and if the license is not explicitly MAC-bound of course) resetting
the ISP's modem makes it "recognize" the new routers' MAC to re-establish
the connection.



"Travis" <(E-Mail Removed)> wrote in message
news:EcKNe.976$g47.557@trnddc07...
> Quaoar wrote:
>> Steve wrote:
>> > I cannot say that I understand what caused my problem, but I
>> > resolved it by swapping out the router to a Linksys Wireless-G
>> > four-port router. It, too, did not work at first as described
>> > below. I used the reset button (held it in until the lights
>> > started blinking) then everything was suddenly A-OK.
>> >
>> > If anyone can tell me what the heck happened, and why it is better
>> > now, I would love to hear it. BTW, I can say that I am pretty
>> > sure I did not mess with any of the settings available in the
>> > router's control panel...
>> >
>> > "Steve" <(E-Mail Removed)> wrote in message
>> > news:xwnNe.152$(E-Mail Removed)...
>> > > No, this is not it. At the moment I have ONE PC on the router,
>> > > and my speed is 2 kB/sec, which of course is the same as a bad
>> > > dialup connection, not a cable modem speed. I am using a test
>> > > download file from my cable provider as my speed check.
>> > >
>> > > My speed should be 600kB per second, not 2.
>> > >
>> > >
>> > > "Quaoar" <(E-Mail Removed)> wrote in message
>> > > news:g_ydnfO_EdSTo5jeRVn-(E-Mail Removed)...
>> > > > Steve wrote:
>> > > > > I have a cable modem (optimum online) and a Linksys BEFSR81
>> > > > > router, and a small bunch of Win XP PCs. After many months
>> > > > > of trouble-free service, suddenly I find that the internet
>> > > > > is coming in at a slow dialup speed - but only when I have
>> > > > > the router inline. When I go direct from the cable modem
>> > > > > to a PC, it works fine - 600kB/sec. What's going on? I
>> > > > > have rebooted the cable modem and the router umpteen times
>> > > > > to no avail. Sometimes it doesn't work at all! When it
>> > > > > dies altogether I go to the router's control panel and do a
>> > > > > DCHP release and renew, which brings it back (to dialup
>> > > > > speed!). Thanks in advance,
>> > > > > Steve
>> > > >
>> > > > You have numerous PCs sharing the internet connection. Each
>> > > > PC eats some of the total bandwidth, and if even one is using
>> > > > much of the more valuable upstream (uploading via P2P) the
>> > > > rest of the system can become dead in the water. This will
>> > > > go away when you are directly connected for obvious reasons.
>> > > >
>> > > > Q

>>
>> Bad router? Any time you swap the device (computer, router)
>> connected to the modem, it is best to reset the modem to clear its
>> on-board MAC address table. Most ISPs allow only one MAC address
>> connected to the modem and when it changes when you swap devices,
>> that address must be cleared to allow the new equipment.

>
> Swapping out the router has nothing to do with what MAC address the ISP
> sees.
> --
>
> Travis in Shoreline Washington


Swapping the router DOES matter, since every router has its own default MAC
address... just like every network card has its own.
Usually (and if the license is not explicitly MAC-bound of course) resetting
the ISP's modem makes it "recognize" the new routers' MAC to re-establish
the connection.
When swapping the router (for a MAC bound license) one has to modify the
routers' MAC.





 
Reply With Quote
 
lbx
Guest
Posts: n/a

 
      08-20-2005, 09:07 PM

>
>Swapping the router DOES matter, since every router has its own default MAC
>address... just like every network card has its own.
>Usually (and if the license is not explicitly MAC-bound of course) resetting
>the ISP's modem makes it "recognize" the new routers' MAC to re-establish
>the connection.
>When swapping the router (for a MAC bound license) one has to modify the
>routers' MAC.
>
>
>
>


My cable access requires a MAC address when registered. If the router
is not set to the same MAC address, then there is no communication
allowed except to a single website of the ISP. When the cable modem
was changed to a better one, the router's MAC address was assigned to
the account instead of a computer's specific address.

For such conditions, the MAC address should not affect the speed.

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
OT: wire rack for Ambit cable modem and Linksys router Timothy Daniels Wireless Networks 1 04-01-2008 07:46 PM
Cable Modem Router Required with 50Mbps Downstream Speed . Network Routers 0 03-29-2007 11:22 PM
Does NTL cable modem block 56K dialup modem? Lem Broadband 1 09-17-2006 06:22 PM
Can I configure an Alcatel Speed Touch 510 router as a switch for use with a cable modem connection Andy Broadband 2 09-28-2005 04:22 PM
Linksys WRT54G router + D-Link DSL 300 T cable modem Will Wireless Internet 8 09-01-2004 01:07 AM



1 2 3 4 5 6 7 8 9 10 11