Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Cable -> Linksys BEFSR41 -> Wireless D-Link DI-714P+

Reply
Thread Tools Display Modes

Cable -> Linksys BEFSR41 -> Wireless D-Link DI-714P+

 
 
D. Picard
Guest
Posts: n/a

 
      09-30-2003, 01:18 AM
I need help please. For a few years now, I have been sharing my internet
connection between 3-4 computers at home and setup a home network. It was
pretty simple: Cable connection into a Linksys BEFSR41 (into WAN connection)
and 4 lines getting out of the Linksys. 2 of the connections go to desktop
computers and 2 are used by laptops computers (mine and my wife's). I used
to VPN with my office without any problem.

Recently, I added a wireless router (D-Link DI-714P+). This router is
plugged with one of the former laptop connection coming from the Linksys. I
connect it in the WAN port of the wireless. Here are the settings for both
the Linksys and the D-Link:

Linksys



LAN IP adress : 192.168.1.1

Subnet Mask : 255.255.255.0



Wan connection type : obtain an IP address automatically



DHCP Server: Enable

Starting IP address: 192.168.1.5

Number of DHCP users: 10

DNS 1: 198.235.216.134

DNS 2: 198.235.216.135



At the time of this writing à DHCP Clients à Wireless (router)
192.168.1.5


LapTop1 192.168.1.7



Port range forwarding:



Application: VPN

Ext. port: 723 to 723

Protocol: TCP, UDP

IP address: 192.168.1.102

Enable



Working mode: Gateway

Dynamic routing: Disabled

D-Link (wireless)



WEP: Disabled



Wan: Dynamic IP address At the
time: 192.168.1.5


Gateway: 192.168.1.1

Primary DNS: 0.0.0.0 DNS:
Same as Linksys

Secondary DNS: 0.0.0.0

Renew IP forever



LAN IP address: 192.168.0.1

Subnet mask: 255.255.255.0



DHCP Server: Enabled

IP Pool Starting address: 192.168.0.100

IP Pool Ending address: 192.168.0.199

Lease time: 1 week



At the time of this writing à DHCP Clients à LapTop1
192.168.0.153


PocketPC 192.168.0.146


(just for test purpose)



Virtual server: none enabled

Special application (incoming port): none enabled

No filtering, routing, DMZ



SNMP: Enable (local)

Get community: public

Set community: private

* *
My questions:

With that setup, the internet is working just fine on the LapTop1. A bit
slow (it sometimes seem to be confused and I guess it is, especially since
LapTop1 has 2 different IP adresses?).

The real problem is that I can no longer do VPN connection with my office.
The LapTop1 crashes deeply (it runs Win XP Professional). The VPN
connection seems to connect but LapTop1 cannot find my office LAN.

When I do a change in the Wireless Router (let's say, disable DHCP), I can
no longer get into it to make changes later (192.168.0.1 no longer
responds). I have to do a "hard reset".

Sorry for the long post, but I realy need help.

Thanks.

Do


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
use a Linksys BEFSR41 cable modem router to make LAN from ADSL Gateway connection? dave @ stejonda Broadband 0 04-20-2005 12:29 PM
Linksys WAP11 BEFSR41 link connectivity problems with PC NIC Peter Graves Wireless Internet 1 05-28-2004 01:59 PM
Linksys BEFSR41 ver 2. etherfast cable/dsl router Corey Perkins Windows Networking 2 10-15-2003 12:29 AM
Cable -> Linksys BEFSR41 -> Wireless D-Link DI-714P+ D. Picard Windows Networking 1 10-04-2003 02:33 AM
D-Link DI-804 and Linksys BEFSR41 NAT problem Eric Chang Linux Networking 2 09-01-2003 07:21 PM



1 2 3 4 5 6 7 8 9 10 11