Generally speaking the way it's done is that you acquire a Wireless router
(like a Linksys WRT54GS or similar) and you plug that into your broadband
modem (be it cable or DSL) as if the router were a computer. Then you plug
any computers that you want to connect via wires into the router and you
configure the wireless on the router and then connect any wireless computers
to that.
Normally I encourage people to use WPA encryption for security, though until
you get the hang of the devices it will make it easier to connect if you
don't and if your area is truly "remote" then you probably don't have much
of a security concern.
Still for the long run it would be worth it for you to read the
documentation for your router before you install it and try to familiarize
yourself with the security options.
--
Aloha,
-Ben-
Ben M. Schorr, OneNote-MVP
Roland Schorr & Tower
http://www.rolandschorr.com
Microsoft OneNote FAQ:
http://www.factplace.com/onenotefaq.htm
**I apologize but I am unable to respond to direct requests for assistance.
Please post questions and replies here in the newsgroup. Mahalo!
"Al" <(E-Mail Removed)> wrote in message
news:FF090304-BE82-4058-9736-(E-Mail Removed)...
>I live in a remote area of the UK and after struggling with dial-up for
>years
> I am at last having wireless broadband installed (no cable, telephone or
> satellite available in my village). I thought I understood the basics of
> wirless networking until I started investigating the purchase of wireless
> kit
> (routers etc). None of the big manufacturers provide advice on
> compatability
> with wireless ISP - is it ADSL or "broadband"? I would greatly appreciate
> some advice so I can shop around for the best kit for this type of
> broadband
> service.
> --
> Cheers, Al