Broadcom teaming 2003 - connection problem

I have Broadcom BACS 9.5.8.0 software installed. I have teamed nework
connections with private and as well public address at the sane time. Two
network cards are teamed. I have tried to remove public address and leave
only the private one. Well I can only remove Ip address only through
Contral panel, ... than properties and click advanced and then remove public
address there.

That is the problem because The BACS (Broadcom Advanced Control Suite) will
not settle in with stable address for more than 5 minutes.
I
Maybe I am doing something wrong with this teaming software?

You may try to remove the NIC teaming first and then re-do it.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Dole Bludger" <(E-Mail Removed)> wrote in message
news:E8C0FEBB-C183-4707-8E5E-(E-Mail Removed)...
>I have Broadcom BACS 9.5.8.0 software installed. I have teamed nework
> connections with private and as well public address at the sane time. Two
> network cards are teamed. I have tried to remove public address and leave
> only the private one. Well I can only remove Ip address only through
> Contral panel, ... than properties and click advanced and then remove
> public
> address there.
>
> That is the problem because The BACS (Broadcom Advanced Control Suite)
> will
> not settle in with stable address for more than 5 minutes.
> I
> Maybe I am doing something wrong with this teaming software?
>
>