Bridge Problem with 2 wifi ap

hi,
i have 2 wired network and i want to connect them wirelessly the
difference between the 2 networks are 2km.. here is what i got :
2 pheenet wap554g dhcp disabled
2 high gain antenna's
2 linksys routers with dhcp enabled


now i want to bridge them so what i did first of all i changed the ip
in the ap's
Access point A:
ip add is 192.168.1.10
default gateway 192.168.1.1(router's ip)
Access point B:
ip add is :192.168.2.10
default gateway 192.168.2.1(router's ip)
Both of The ap are with the same name,same channel,same frequency

now what i did is i set the mode to ap point to multi point and
added the lan mac or (B or E)ssid of A in B and the id of B in A. and i
used the same name for them too.Now when i search for wireless
connections i dont seem to find any..i think in bridge mode u are not
supposed to see that particular connection.anyway is this configuration
suppose to work??? coz icudnt get it work...pls help...By the way ryt
now the adsl routers i am using to test this connection is linksys
wag354g but when i go for the actual installation i dont know which
routers will be there but i can assure u that there will be linksys
routers over there ... pls comment


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=28169
http://www.wirelessforums.org