Bind multiple IPs to 1 NIC

Hi:
I need to bind multiple IP addresses to the WAN Card of my ISA server 2006
running on Server 2003 standard in order to publish OWA and RPC. When I add
an additional IP address to the Broadcom BCM5708C on the avanced page of the
Internet protocol TCP/IP > properties > Advanced > IP settings Tab > IP
addresses > ADD and accept the settings the nework card goes to "Aquiring
network address" status and just stays there. What do I need to configure to
allow me to bind Multiple IPs to this one NIC?

Thanks for any help in this matter.

Randy Dillard
--
Thanks

Hello,

is you NIC in DHCP ?


--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"Ralphdjr" <(E-Mail Removed)> wrote in message
news:F4DEF49E-B0A6-4A44-AB73-(E-Mail Removed)...
> Hi:
> I need to bind multiple IP addresses to the WAN Card of my ISA server 2006
> running on Server 2003 standard in order to publish OWA and RPC. When I
> add
> an additional IP address to the Broadcom BCM5708C on the avanced page of
> the
> Internet protocol TCP/IP > properties > Advanced > IP settings Tab > IP
> addresses > ADD and accept the settings the nework card goes to "Aquiring
> network address" status and just stays there. What do I need to configure
> to
> allow me to bind Multiple IPs to this one NIC?
>
> Thanks for any help in this matter.
>
> Randy Dillard
> --
> Thanks

No, I am assigning two fixed IPs
--
Thanks


"Mathieu CHATEAU" wrote:

> Hello,
>
> is you NIC in DHCP ?
>
>
> --
> Cordialement,
> Mathieu CHATEAU
> http://lordoftheping.blogspot.com
>
>
> "Ralphdjr" <(E-Mail Removed)> wrote in message
> news:F4DEF49E-B0A6-4A44-AB73-(E-Mail Removed)...
> > Hi:
> > I need to bind multiple IP addresses to the WAN Card of my ISA server 2006
> > running on Server 2003 standard in order to publish OWA and RPC. When I
> > add
> > an additional IP address to the Broadcom BCM5708C on the avanced page of
> > the
> > Internet protocol TCP/IP > properties > Advanced > IP settings Tab > IP
> > addresses > ADD and accept the settings the nework card goes to "Aquiring
> > network address" status and just stays there. What do I need to configure
> > to
> > allow me to bind Multiple IPs to this one NIC?
> >
> > Thanks for any help in this matter.
> >
> > Randy Dillard
> > --
> > Thanks
>
>

Is is a dell server ?

that's a bug in the Dell Broadcom driver as mentionned by their technical
update notification.
New File Updates

================================================== ====================
Network: Broadcom NetXtreme Family of Adapters, NetXtreme II Family of
Adapters, Driver, Windows Server 2003, English, Multi System, v.10.19.01,
A05
Criticality: Optional
File Date: 8/29/2007 12:00:00 AM
Description: Fix to the installer (setup.exe) to fix an issue where updating
from the 2.6 and 8.3 family driver versions would cause a loss of static IP
addresses and other instance specific settings. This is only an update to
the installer of this release, the driver and application versions are
exactly the same. The DUP release is also changed to fix an issue where the
DUP would not update from a PnP or driver only install.

You can view the details of this file at the following location:

http://support.dell.com/support/down...2&source=email


--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com


"Ralphdjr" <(E-Mail Removed)> wrote in message
news:2B800665-5D24-476A-916A-(E-Mail Removed)...
> No, I am assigning two fixed IPs
> --
> Thanks
>
>
> "Mathieu CHATEAU" wrote:
>
>> Hello,
>>
>> is you NIC in DHCP ?
>>
>>
>> --
>> Cordialement,
>> Mathieu CHATEAU
>> http://lordoftheping.blogspot.com
>>
>>
>> "Ralphdjr" <(E-Mail Removed)> wrote in message
>> news:F4DEF49E-B0A6-4A44-AB73-(E-Mail Removed)...
>> > Hi:
>> > I need to bind multiple IP addresses to the WAN Card of my ISA server
>> > 2006
>> > running on Server 2003 standard in order to publish OWA and RPC. When I
>> > add
>> > an additional IP address to the Broadcom BCM5708C on the avanced page
>> > of
>> > the
>> > Internet protocol TCP/IP > properties > Advanced > IP settings Tab > IP
>> > addresses > ADD and accept the settings the nework card goes to
>> > "Aquiring
>> > network address" status and just stays there. What do I need to
>> > configure
>> > to
>> > allow me to bind Multiple IPs to this one NIC?
>> >
>> > Thanks for any help in this matter.
>> >
>> > Randy Dillard
>> > --
>> > Thanks
>>
>>