Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Best method of active usb extensions

Reply
Thread Tools Display Modes

Best method of active usb extensions

 
 
noprofiles
Guest
Posts: n/a

 
      01-27-2006, 08:44 PM
(sorry if this post appears more than once-newserver not propogating)

Since my electronics knowledge is kinda limited, have to ask this here.

I need to span about 26 feet from a outdoor dish to indoor usb adapter
client to my computers (hope JeffL. can answer, but will take all
advice).

USB client adapter has an external MMX (from memory) antenna jack and is
200mw.

First link in chain will be 5 feet of coax with receiving element which
I thinking could be bare coax wire positioned at focal point?, maybe
with a homemade reflector? (or what would u suggest), since this is a
homemade dish antenna and would have a male MMX jack at the other end
(whatever that's called?) to connect to the usb adapter.

Next link will be inside from 2 foot pigtail coming from USB client
adapter to one of the following:


an a)active usb extension cable-most are only 16 feet + non active cable
(to make up the difference) to the box, OR

b) passive long cable leading to powered hub, then passive cable to box
OR

c) hub to passive long cable to box

I am not sure which is better to use? and active long usb extension
cable or a powered hub or both for the approx 20 feet from usb pigtail
to the box. From the picture the pigtail ends with a female USB jack
(what are they called?) so will probably need a male to female
arrangement to the box (no pun intended, haha).

I realize there will be losses from the coax, but that is unavoidable
with this arrangement (using a bridge is not an option at this point).

Any advice you can give on making a good receiving element at the
homemade dish and on the cable arrangments is most appreciated. Thank
you very much, this group has been a big help.


 
Reply With Quote
 
 
 
 
William P.N. Smith
Guest
Posts: n/a

 
      01-28-2006, 04:53 AM
noprofiles <(E-Mail Removed)> wrote:
>an a)active usb extension cable-most are only 16 feet + non active cable
>(to make up the difference) to the box, OR
>
>b) passive long cable leading to powered hub, then passive cable to box
>OR
>
>c) hub to passive long cable to box


How about one of those USB-extension-over-cat5 boxes like
http://www.cyberguys.com/templates/s...&child=1ca78-1
 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Virgin.net - when an active line is not active Steve Dunn Broadband 10 04-16-2007 02:43 AM
Boot Method? Uday Mullangi Linux Networking 0 12-30-2004 04:14 AM
Too many extensions? ChrisR Broadband 7 10-08-2004 05:10 PM
AddWindowsPrinterConnection Method Colin MacGillivray Windows Networking 0 09-15-2003 02:54 PM
routing - method Geoff Lane Home Networking 6 09-10-2003 10:34 PM



1 2 3 4 5 6 7 8 9 10 11