bellsouth dsl modem

Can anyone tell me a possible brand/model of dsl modem/router that Bellsouth
uses (now ATT). The modem in question is also wireless and has been in
place approx 18 months.

I have to work with the configuration of this modem/router and would like to
be able to find the specs/manual before going to the customer.

(installed in Kentucky)

On Mon, 11 Feb 2008 10:50:17 -0500, "rieker"
<(E-Mail Removed)> wrote in
<47b06eb6$0$6154$(E-Mail Removed)>:

>Can anyone tell me a possible brand/model of dsl modem/router that Bellsouth
>uses (now ATT). The modem in question is also wireless and has been in
>place approx 18 months.
>
>I have to work with the configuration of this modem/router and would like to
>be able to find the specs/manual before going to the customer.
>
>(installed in Kentucky)

Instead of guessing, suggest you call the customer and ask to have the
make, model, and FCC ID read to you over the phone.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>

"rieker" <(E-Mail Removed)> hath wroth:

>Can anyone tell me a possible brand/model of dsl modem/router that Bellsouth
>uses (now ATT). The modem in question is also wireless and has been in
>place approx 18 months.

No clue about BellSouth, but on the left coast, AT&T has been using
2wire 2701HG modems.
<http://www.2wire.com/index.php?p=266>
In my never humble opinion, there are very nicely built and fairly
easy to setup modems. Punch in the proper code:
<http://www.2wire.com/index.php?p=268>
and it's ready to install. Security is setup by default using a
WEP/WPA key printed on the serial number tag. I believe the current
models are delivered with a WPA key. If you get one with a WEP key
set, I suggest you change it to WPA and a longer key.

Some wonderful person was good enough to provide an online emulator
at:
<http://www.supportshots.com/two_wire/index.html>
which should be adequate to give you a preliminary tour of the setup.
It's not perfect, but close enough.

>I have to work with the configuration of this modem/router and would like to
>be able to find the specs/manual before going to the customer.
>(installed in Kentucky)

It would probably be a good idea to ask the customer what they are
using.

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Jeff Liebermann <(E-Mail Removed)> hath wroth:

>Some wonderful person was good enough to provide an online emulator
>at:
><http://www.supportshots.com/two_wire/index.html>
>which should be adequate to give you a preliminary tour of the setup.

I forgot to mention the hidden diagnostics menu on the 2wire 2701HG.
Go to:
http://gateway.2wire.net/mdc/
and you'll find many more diagnostic menus.
<http://www.mydigitallife.info/2007/04/29/advanced-configuration-page-for-2wire-homeportal-residential-router-gateways-singtel-mio/>
<http://www.supportshots.com/two_wire/mdc/mdc.html>

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558