Belking G to N problem

I've setup a new wireless install as follows:



Belkin Pre N router, Belkin "High Speed" 11g desktop NIC # F5D7001, and a
D-Link NIK running 11b. One computer is hard wired. All OS's are WinXP Pro
with all updates including sp2. 4 machines total.



My problem is on the machine running the 11g NIC I have a user that is not
an administrator. When logged in as a user the NIC is disabled, that is the
"radio" is off and I can't turn it on so there's no connection. If I make
that user an administrator all is well.



The machine with D-Link card works fine.



I've called Belkin and they indicated that they've seen this once before and
it went to second level support then I got cut off. Will call tomarrow.



Any thoughts?



Unless you folks have something I'll post their solution when I get it.

Well I talked to Belkin and they say they say there's nothing wrong with the
card. Instead, either there's a service that's running that shouldn't, or
one that's not running that should.

Any thought on what that service might be?

Don


"Don W." <(E-Mail Removed)> wrote in message
news:l2HEd.1348$(E-Mail Removed)...
> I've setup a new wireless install as follows:
>
>
>
> Belkin Pre N router, Belkin "High Speed" 11g desktop NIC # F5D7001, and a
> D-Link NIK running 11b. One computer is hard wired. All OS's are WinXP Pro
> with all updates including sp2. 4 machines total.
>
>
>
> My problem is on the machine running the 11g NIC I have a user that is not
> an administrator. When logged in as a user the NIC is disabled, that is
the
> "radio" is off and I can't turn it on so there's no connection. If I make
> that user an administrator all is well.
>
>
>
> The machine with D-Link card works fine.
>
>
>
> I've called Belkin and they indicated that they've seen this once before
and
> it went to second level support then I got cut off. Will call tomarrow.
>
>
>
> Any thoughts?
>
>
>
> Unless you folks have something I'll post their solution when I get it.
>
>