Belkin wireless router to DSL 504g - Help

I have a DSL 504G ADSL modem/Router connected to the internet. It is setup
to be always-on mode.
I have static IP address ADSL connection.


Now I have bought a new Dell Notebook computer and a Belkin wireless
router - Dell package.

I want to use DSL 504 G to connect to other PC's using the Ethernet wire as
it is now .

And use the new Belkin wireless router to connect to the notebook using
wireless connection. ( I am not going to use the wirelss router for any
wired connections to any pc)

Can someone help me to figure out how to connect the Belkin wireless router
to the DSL 504G modem/router,



Thanks for your advice/help

On Wed, 8 Nov 2006 13:01:59 +1100, "Tissa" <(E-Mail Removed)>
wrote in <(E-Mail Removed)>:

>I have a DSL 504G ADSL modem/Router connected to the internet. It is setup
>to be always-on mode.
>I have static IP address ADSL connection.
>
>
>Now I have bought a new Dell Notebook computer and a Belkin wireless
>router - Dell package.
>
>I want to use DSL 504 G to connect to other PC's using the Ethernet wire as
>it is now .
>
>And use the new Belkin wireless router to connect to the notebook using
>wireless connection. ( I am not going to use the wirelss router for any
>wired connections to any pc)
>
>Can someone help me to figure out how to connect the Belkin wireless router
>to the DSL 504G modem/router,

Configure it as an access point, by turning off DHCP, and connecting a
LAN port to a LAN port on the 504G. Leave the WAN port unconnected.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>

Tissa <(E-Mail Removed)> wrote:

> Can someone help me to figure out how to connect the Belkin wireless router
> to the DSL 504G modem/router,

The netgear instructions are generic enough that they probably apply to
your Belkin.

http://kbserver.netgear.com/kb_web_files/n101496.asp
"Using the WGR614 router as a Wireless Access Point."

Turn off DHCP, set the "WAN address" to something harmless, outside of your
normal subnet, and connect your existing router to the LAN side of the
Belkin, leaving the Belkin WAN connection unused.

--
---
Clarence A Dold - Hidden Valley Lake, CA, USA GPS: 38.8,-122.5

Thanks for the help. It is working now. Appreciate it.

<(E-Mail Removed)> wrote in message
news:eismdb$elt$(E-Mail Removed)...
> Tissa <(E-Mail Removed)> wrote:
>
>> Can someone help me to figure out how to connect the Belkin wireless
>> router
>> to the DSL 504G modem/router,
>
> The netgear instructions are generic enough that they probably apply to
> your Belkin.
>
> http://kbserver.netgear.com/kb_web_files/n101496.asp
> "Using the WGR614 router as a Wireless Access Point."
>
> Turn off DHCP, set the "WAN address" to something harmless, outside of
> your
> normal subnet, and connect your existing router to the LAN side of the
> Belkin, leaving the Belkin WAN connection unused.
>
> --
> ---
> Clarence A Dold - Hidden Valley Lake, CA, USA GPS: 38.8,-122.5

Thank you for your help - it is working for your config info.

"John Navas" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> On Wed, 8 Nov 2006 13:01:59 +1100, "Tissa" <(E-Mail Removed)>
> wrote in <(E-Mail Removed)>:
>
>>I have a DSL 504G ADSL modem/Router connected to the internet. It is setup
>>to be always-on mode.
>>I have static IP address ADSL connection.
>>
>>
>>Now I have bought a new Dell Notebook computer and a Belkin wireless
>>router - Dell package.
>>
>>I want to use DSL 504 G to connect to other PC's using the Ethernet wire
>>as
>>it is now .
>>
>>And use the new Belkin wireless router to connect to the notebook using
>>wireless connection. ( I am not going to use the wirelss router for any
>>wired connections to any pc)
>>
>>Can someone help me to figure out how to connect the Belkin wireless
>>router
>>to the DSL 504G modem/router,
>
> Configure it as an access point, by turning off DHCP, and connecting a
> LAN port to a LAN port on the 504G. Leave the WAN port unconnected.
>
> --
> Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
> John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
> Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
> Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>