Have spent hours getting to a point where I can print wirelessly only by
rebooting the laptop and then printing one document. Further prints fail -
unless laptop rebooted. Print Server connected wirelessly to a Dlink
DSL-G602T modem/router. I reckon that, since the print server WLAN light is
flickering intermittently the whole time - even when the machine is switched
off - that the print is not completed properly and that the print server does
not receive a print end instruction. This is borne out also after rebooting
and printing that only 99% of the print job is performed - it never gets to
100%. Has anyone else seen this problem - and has anyone fixed it? Or else
the print server will have to go back to the store!
--
Many thanks, Scoobydad
|
Similar Threads
Linear Mode
