Networking Forums

Networking Forums > Computer Networking > Broadband > Basic router problem, need help.

Reply
Thread Tools Display Modes

Basic router problem, need help.

 
 
Sneakysnake
Guest
Posts: n/a

 
      11-06-2003, 10:07 AM
Help!

I am running a US Robotics Sureconnect 9003 ADSL Modem/Router and all
I want to do is open a port.

I am running a PC with Windows XP Home edition installed with Zone
Alarms free firewall and the above router, I have tried a number of
things to make a port open to the internet, but whatever I tried I get
nowhere (I am using the shields up website to test (all ports remain
"stealth"))

My ISP is freedom2surf and I have their 512K ADSL wires only
connection

Currently I am unable to run the following applications:

Battlecom
mIRC
eMule (LowID)

Any help would be appreciated, The user guide can be found:

http://www.usr.com/support/9003/9003-ug/index.htm

However I can not see the woods for the trees, with the all the
options with this router and little experience of networks

thanks in advance

Sneaky (Steve
 
Reply With Quote
 
 
 
 
Infant Newbie
Guest
Posts: n/a

 
      11-08-2003, 09:07 PM
First, disable zone alarm and check again with grc - that should tell u if
it is your router or a zone alarm problem

bart
http://www.meshcode.net
"Sneakysnake" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Help!
>
> I am running a US Robotics Sureconnect 9003 ADSL Modem/Router and all
> I want to do is open a port.
>
> I am running a PC with Windows XP Home edition installed with Zone
> Alarms free firewall and the above router, I have tried a number of
> things to make a port open to the internet, but whatever I tried I get
> nowhere (I am using the shields up website to test (all ports remain
> "stealth"))
>
> My ISP is freedom2surf and I have their 512K ADSL wires only
> connection
>
> Currently I am unable to run the following applications:
>
> Battlecom
> mIRC
> eMule (LowID)
>
> Any help would be appreciated, The user guide can be found:
>
> http://www.usr.com/support/9003/9003-ug/index.htm
>
> However I can not see the woods for the trees, with the all the
> options with this router and little experience of networks
>
> thanks in advance
>
> Sneaky (Steve



 
Reply With Quote
 
kalki
Guest
Posts: n/a

 
      11-10-2003, 04:26 PM
For Port Mapping/forwarding, firewall settings and eMule Example go to
Port Mapping at:
http://www.homepagez.com/usr9003/
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
basic routing problem mark Linux Networking 14 10-16-2006 08:04 PM
Problem with Zoom X4 and BT Broadband Basic simon Broadband 12 05-28-2005 10:48 AM
Basic network setup problem Fatted Linux Networking 5 07-06-2004 11:03 AM
Basic connectivity problem Leslie Windows Networking 1 06-20-2004 06:25 AM
basic problem? Brad Wireless Internet 1 04-04-2004 08:10 PM



1 2 3 4 5 6 7 8 9 10 11