Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > Base Station 500 Manual IP Address?

Reply
Thread Tools Display Modes

Base Station 500 Manual IP Address?

 
 
handy
Guest
Posts: n/a

 
      05-01-2004, 03:50 PM

Is there one for the MN-500?

e.g Netgear has one it's:
The IP Address is between 192.168.0.2 and 192.168.0.254
• The Subnet mask is 255.255.255.0
• The Gateway address is 192.168.0.1
• DNS Servers as 192.168.0.1 and 4.2.2.2
 
Reply With Quote
 
 
 
 
Chris H.
Guest
Posts: n/a

 
      05-01-2004, 03:58 PM
The default address is 192.168.2.1, with "admin" (without the quotation
marks) as the default password.
--
Chris H.
Microsoft Windows MVP
http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"handy" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> Is there one for the MN-500?
>
> e.g Netgear has one it's:
> The IP Address is between 192.168.0.2 and 192.168.0.254
> . The Subnet mask is 255.255.255.0
> . The Gateway address is 192.168.0.1
> . DNS Servers as 192.168.0.1 and 4.2.2.2



 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows Server 2003 R2 - Manual IP Address Richard_B Windows Networking 2 02-01-2007 10:22 AM
Using DHCP but assign a manual address? Mark Wireless Internet 7 01-27-2007 04:17 PM
Base Station Manager can't find MN-100 Wired Base Station Dominus Broadband Hardware 0 02-03-2005 05:17 PM
configuring the base wireless base station MN500 (b) victor maratovich Broadband Hardware 0 02-01-2005 04:50 PM
Manual MN-700 base station setup problems Grif Broadband Hardware 1 01-27-2004 03:11 PM



1 2 3 4 5 6 7 8 9 10 11