atmel wlan boot problem

Hi,
I am using an atmel wlan card via usb with the driver usbvnetr on Suse 8.0
with Kernel 2.4.18.

When I power on the system, the wlan card is not detected and therefore the
network device not available.

BUT, after doing an init 6 (reboot) the card is detected and everything
works fine..

Any experience with it? Any hints what the problem could be ??

Looks to me it could be a hotplug problem, rather than a wlan problem, but
restarting hotplug doesn't do the trick.

Thanks in advance..

Helmut

P.S. The driver reports ATMEL RFMD503A when the card is detected.

Just a driver problem..
It's solved now..

"avionic" <(E-Mail Removed)> schrieb im Newsbeitrag
news:ceo64m$d8$(E-Mail Removed)...
> Hi,
> I am using an atmel wlan card via usb with the driver usbvnetr on Suse 8.0
> with Kernel 2.4.18.
>
> When I power on the system, the wlan card is not detected and therefore
the
> network device not available.
>
> BUT, after doing an init 6 (reboot) the card is detected and everything
> works fine..
>
> Any experience with it? Any hints what the problem could be ??
>
> Looks to me it could be a hotplug problem, rather than a wlan problem, but
> restarting hotplug doesn't do the trick.
>
> Thanks in advance..
>
> Helmut
>
> P.S. The driver reports ATMEL RFMD503A when the card is detected.
>
>