AP in bridge mode don't act as WAP...

Hi, I had setup a wireless bridge beetween a remote router and an access
point, where I can connect my PC using an ethernet cable.
Now I want to access Internet from my PC without using the ethernet cable,
but wireless.
I know that in bridge mode, the access point do not act as a WAP... can
anyone help me? I already tried connecting another access point to the AP in
my home, but it doesn't work!

Thanks,

Claudio

Try setting your router up as a repeater instead of a bridge.

I didn't find this option in my router, I only have a WDS option and using
this it works fine, but too slow, instead in bridge mode it works very fast,
but I can't connect my pc using wireless.
Do you have any idea why adding another AP it doesn't work?

Claudio

Claudio Zanetta <(E-Mail Removed)> wrote:

> I didn't find this option in my router, I only have a WDS option and using
> this it works fine, but too slow, instead in bridge mode it works very fast,
> but I can't connect my pc using wireless.
> Do you have any idea why adding another AP it doesn't work?

Have you tried using a "crossed" cable or a hub/switch?

A crossed cable, I can ping my AP but Internet doesn't work.

Claudio

Claudio Zanetta <(E-Mail Removed)> wrote:

> A crossed cable, I can ping my AP but Internet doesn't work.

Does the AP you can ping have its DHCP server turned on?

Claudio Zanetta wrote:
> I didn't find this option in my router, I only have a WDS option and using
> this it works fine, but too slow, instead in bridge mode it works very fast,
> but I can't connect my pc using wireless.
> Do you have any idea why adding another AP it doesn't work?
>
> Claudio
>
>
I think that one would of expected that as it is repeating information.
I would also imagine it might be 50% or more slower.

--
MicroSoft's NEW Motto: "Good enough." When you're on top, that's the
only standard that matters.

No, all static ip.

Claudio

"Axel Hammerschmidt" <(E-Mail Removed)> ha scritto nel messaggio
news:1hs94so.1xtjzli64bf2gN%(E-Mail Removed)...
> Claudio Zanetta <(E-Mail Removed)> wrote:
>
>> A crossed cable, I can ping my AP but Internet doesn't work.
>
> Does the AP you can ping have its DHCP server turned on?

On Fri, 19 Jan 2007 21:57:39 GMT, "Claudio Zanetta"
<(E-Mail Removed)> wrote in
<n9bsh.947$(E-Mail Removed)>:

>Hi, I had setup a wireless bridge beetween a remote router and an access
>point, where I can connect my PC using an ethernet cable.
>Now I want to access Internet from my PC without using the ethernet cable,
>but wireless.
>I know that in bridge mode, the access point do not act as a WAP... can
>anyone help me? I already tried connecting another access point to the AP in
>my home, but it doesn't work!

That should work if connected and configured correctly:

+----------+ +----------+
| Wireless | | Wireless |
......... Ethernet +--------+ Access .........
| Bridge | CAT5 | Point |
+----------+ +----------+

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>