Anyone using an SMC SMC2804WBRP-G, wireless router with USB and parallel print server??

Anyone using the SMC SMC2804WBRP-G -- it's a wireless access point, router,
and USB and parallel print server. Connect your printer to the USB or
parallel port on the router then all computers connected to the router or
the access point print to the same printer.

What are your experiences?

Thanks.

[POSTED TO alt.internet.wireless - REPLY ON USENET PLEASE]

In <(E-Mail Removed)> on Sun, 20 Nov 2005 07:37:21 -0500, "Joe
S." <(E-Mail Removed)> wrote:

>Anyone using the SMC SMC2804WBRP-G -- it's a wireless access point, router,
>and USB and parallel print server. Connect your printer to the USB or
>parallel port on the router then all computers connected to the router or
>the access point print to the same printer.
>
>What are your experiences?

As always, "Google is your friend:"
<http://groups.google.com/groups?q=SMC%20SMC2804WBRP-G&sa=N&tab=wg>

--
Best regards, FAQ FOR CINGULAR WIRELESS
John Navas <http://en.wikibooks.org/wiki/Cingular_Wireless_FAQ>

Thanks to all who replied. I purchased the SMC SMC2804WBRP-G -- it set up
flawlessly. I then connected my printer to it and went about setting up the
router's print server function. Had a bit of a struggle getting the laptop
to talk to the printer through the wireless AP -- but it all cleared up when
I read the instructions.

Good piece of equipment.



"Joe S." <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Anyone using the SMC SMC2804WBRP-G -- it's a wireless access point,
> router, and USB and parallel print server. Connect your printer to the
> USB or parallel port on the router then all computers connected to the
> router or the access point print to the same printer.
>
> What are your experiences?
>
> Thanks.
>