Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > anyone using 802.11b with WPA?

Reply
Thread Tools Display Modes

anyone using 802.11b with WPA?

 
 
Todd H.
Guest
Posts: n/a

 
      12-30-2003, 06:26 PM

I remain keenly interested in impediments to Wi-Fi Protected Access
(WPA) deployment.

I'm curious if there are any lurkers here who are currently using WPA
with 802.11b hardware. If so, what combo of AP and client card,
software are you using? If you know, are you using preshared keys or
radius authentication?

Best Regards,
--
Todd H.
http://www.toddh.net/
 
Reply With Quote
 
 
 
 
Yves Konigshofer
Guest
Posts: n/a

 
      12-30-2003, 07:19 PM
There are probably quite a few people using Centrino with various APs.

If the WPA-supporting Linksys WRT54G firmware would work properly, I would
be using it with a Linksys WPC11v3 card. In that setting, I would be using
a preshared key.

Stanford uses no encryption on their it-would-be-nice-if-it-were-campus-wide
wireless network but one does have to identify oneself first through an
SSL-secured connection. All university-related resources then require
either Kerberos, SSH, or SSL. As far as I know, general web surfing is thus
unencrypted.

-Yves

"Todd H." <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> I remain keenly interested in impediments to Wi-Fi Protected Access
> (WPA) deployment.
>
> I'm curious if there are any lurkers here who are currently using WPA
> with 802.11b hardware. If so, what combo of AP and client card,
> software are you using? If you know, are you using preshared keys or
> radius authentication?
>
> Best Regards,
> --
> Todd H.
> http://www.toddh.net/



 
Reply With Quote
 
Todd H.
Guest
Posts: n/a

 
      12-30-2003, 08:03 PM
"Yves Konigshofer" <(E-Mail Removed)> writes:

> There are probably quite a few people using Centrino with various APs.
>
> If the WPA-supporting Linksys WRT54G firmware would work properly, I
> would be using it with a Linksys WPC11v3 card. In that setting, I
> would be using a preshared key.


What problem are you having? I have that AP and am using WPA
successfully (after an AP firmware upgrade)..albeit with a b/g card
(Proxim Orinoco 11bg Combocard Gold with the businessguy on it).

> Stanford uses no encryption on their
> it-would-be-nice-if-it-were-campus-wide wireless network but one
> does have to identify oneself first through an SSL-secured
> connection. All university-related resources then require either
> Kerberos, SSH, or SSL. As far as I know, general web surfing is
> thus unencrypted.


Ah...

--
Todd H.
http://www.toddh.net/
 
Reply With Quote
 
Yves Konigshofer
Guest
Posts: n/a

 
      12-30-2003, 10:37 PM
The problem is that with any firmware after 1.41.2 where WPA-PSK finally
works (using WPA-PSK crashes the router with and prior to 1.41.2), there are
frequent short disconnects (every few minutes) that are
WPA/WEP/802.1x/etc.-independent. I assume that this only affects
connections with 802.11b cards, such as their WPC11v3. Linksys has
acknowledged this as a bug but has not fixed it yet (I've tried every
firmware since 1.41.2).

I tried the firmware for the v2 router but that one actually managed to
crash my router within 12 hours and the bug was still present. I had
installed it the previous evening (and it worked) but the router was
unresponsive to wireless and wired connections the next morning until it was
power cycled. I would really like Linksys to list every bug they fix with
every updated firmware so that I do not have to try them out to see if they
work.

There's also an issue with WPA-PSK that is either related to the WPC11v3
driver or the MS WPA supplicant. Usually, if the AP is properly configured
with WZC, then XP will associate with the AP prior to logon and will remain
associated after logoff. At least that is the case when WEP or no
encryption is used. When WPA is used instead, XP will associate prior to
logon but will permanently (until restart) dissociate upon logoff. If I
logon after the logoff (no restart) then I have to manually select the AP.

-Yves

"Todd H." <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> "Yves Konigshofer" <(E-Mail Removed)> writes:
>
> > There are probably quite a few people using Centrino with various APs.
> >
> > If the WPA-supporting Linksys WRT54G firmware would work properly, I
> > would be using it with a Linksys WPC11v3 card. In that setting, I
> > would be using a preshared key.

>
> What problem are you having? I have that AP and am using WPA
> successfully (after an AP firmware upgrade)..albeit with a b/g card
> (Proxim Orinoco 11bg Combocard Gold with the businessguy on it).
>
> > Stanford uses no encryption on their
> > it-would-be-nice-if-it-were-campus-wide wireless network but one
> > does have to identify oneself first through an SSL-secured
> > connection. All university-related resources then require either
> > Kerberos, SSH, or SSL. As far as I know, general web surfing is
> > thus unencrypted.

>
> Ah...
>
> --
> Todd H.
> http://www.toddh.net/



 
Reply With Quote
 
Todd H.
Guest
Posts: n/a

 
      12-30-2003, 10:59 PM
"Yves Konigshofer" <(E-Mail Removed)> writes:

> The problem is that with any firmware after 1.41.2 where WPA-PSK finally
> works (using WPA-PSK crashes the router with and prior to 1.41.2)


Yeah, been there done that!

> , there are frequent short disconnects (every few minutes) that are
> WPA/WEP/802.1x/etc.-independent. I assume that this only affects
> connections with 802.11b cards, such as their WPC11v3. Linksys has
> acknowledged this as a bug but has not fixed it yet (I've tried
> every firmware since 1.41.2).


Oy. That's not good. I don't get blessed with this since I'm running
in G it seems.

> power cycled. I would really like Linksys to list every bug they fix with
> every updated firmware so that I do not have to try them out to see if they
> work.


That would be nice--they're release notes are nearly worthless.

--
Todd H.
http://www.toddh.net/
 
Reply With Quote
 
Jim Miller
Guest
Posts: n/a

 
      01-23-2004, 12:19 AM
I'm using WPA-PSK/TKIP with Dell Inspirion 500 and 600 notebooks equipped
with Intel Centrino 802.11B and a Linksys WRT54G router.

It now works flawlessly.

jtm


"Todd H." <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...

I remain keenly interested in impediments to Wi-Fi Protected Access
(WPA) deployment.

I'm curious if there are any lurkers here who are currently using WPA
with 802.11b hardware. If so, what combo of AP and client card,
software are you using? If you know, are you using preshared keys or
radius authentication?

Best Regards,
--
Todd H.
http://www.toddh.net/


 
Reply With Quote
 
Todd B
Guest
Posts: n/a

 
      01-23-2004, 01:23 AM
I'm using it with Linksys 54G wireless broadband router and three wireless
nodes. Its great!!

"Jim Miller" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I'm using WPA-PSK/TKIP with Dell Inspirion 500 and 600 notebooks equipped
> with Intel Centrino 802.11B and a Linksys WRT54G router.
>
> It now works flawlessly.
>
> jtm
>
>
> "Todd H." <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>
> I remain keenly interested in impediments to Wi-Fi Protected Access
> (WPA) deployment.
>
> I'm curious if there are any lurkers here who are currently using WPA
> with 802.11b hardware. If so, what combo of AP and client card,
> software are you using? If you know, are you using preshared keys or
> radius authentication?
>
> Best Regards,
> --
> Todd H.
> http://www.toddh.net/
>
>



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




1 2 3 4 5 6 7 8 9 10 11