any body can help me connecting CABLE modem to Accesspoint from there to Laptop wirelessle

hi eddi,

i have some probloem, with WAG54 adsl gateway.

when i have BT connection i use to use adsl gateway an modem and
wirelesee router. so use to connect through my laptop . i am using
internet. very thing is fine.


now i changed my service provider from BT to Telewest.

so telewest provide cable modem for broadband access.

what i did i connected Cable modem to my ADSL gateway from there i
want to access my Laptop. when i connect with wire to my laptop from
gateway i can able to access Internet.

when i disconnect cable i tried to connect wireless then my laptop
connects to my Accesspoint but i can't acess the internet.

page can't dilply.

keep on talking with Lynksys they are spending some 3 hour says wait
let us refer some documents nothing progress,

Can you give me any solutions please/

cheers

govind

On 19 Dec 2005 02:50:18 -0800, "Govind" <(E-Mail Removed)> wrote:

>i have some probloem, with WAG54 adsl gateway.
>
>when i have BT connection i use to use adsl gateway an modem and
>wirelesee router. so use to connect through my laptop . i am using
>internet. very thing is fine.
>
>now i changed my service provider from BT to Telewest.
>
>so telewest provide cable modem for broadband access.
>
>what i did i connected Cable modem to my ADSL gateway from there i
>want to access my Laptop. when i connect with wire to my laptop from
>gateway i can able to access Internet.
>
>when i disconnect cable i tried to connect wireless then my laptop
>connects to my Accesspoint but i can't acess the internet.
>
>page can't dilply.

This will not work. Your WAG54 is designed to go from ADSL to
ethernet. In order to use it as a wireless router, you would need to
have access to the connection between the ADSL modem bridge section
and the WAN port on the router section. These are not accessible in
the WAG54. Methinks it best that you sell the WAG54 and purchase any
ethernet wireless router, which will work.

There is one thing you can do, but I don't recommend it. You can
configure and wire your WAG54 to act as a wireless access point. I
don't recommend doing this because you don't have a router to protect
your computer from attacks via the internet. In the access point
configuration, the ADSL modem and router sections of the WAG54 are not
used. Configuration details if you want them, but I don't recommend
doing this.

>keep on talking with Lynksys they are spending some 3 hour says wait
>let us refer some documents nothing progress,

Your configuration is not a commonly used arrangement. I would not
expect Linksys support to be able to configure something that cannot
be done.

>Can you give me any solutions please/

Purchase an ethernet wireless router and attach it to your existing
cable modem. Sell the WAG54. Purchase a keyboard with a functional
caps lock key.

--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558