Hi , I have a problem trying to configurate an alcatel speed touch pro
for a lan with static ip address.
I have 16 static address assigned by my ISP.
We can call them 81.210.154.8/28
I added a new address to the router interface eth0:
81.210.154.222 with subnet mask 255.255.255.240
Then I deleted the old address on router interface eth0 : 10.0.0.138
The protocol I have to use is vc-mux PPPoA.
I set the local ip in the PPPoA configuration as:
81.210.154.209
remote address none because ISP gave me none.
NAT disabled.
Connection always on
When I try no connect it doesn't. It keeps tryng and doesn't connect.
This is my routing table:
DESTINATION SOURCE GATEWAY
81.210.154.8/28 81.210.154.8/24 81.210.154.8 eth0
81.210.154.222/32 any 81.210.154.222 eth0
127.0.0.1/32 any 127.0.0.1 loop
81.210.154.8/28 any 81.210.154.8/28 eth0
I don't think there are problems on the ISP side because when I try to
connect with LAN 10.0.0.0 and gateway 10.0.0.138 with NAT the router
connects to the ISP and it works fine.
Thnx for your help.
|
Similar Threads
Linear Mode
