Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > After the base station MN-500 gets programmed....kaboom

Reply
Thread Tools Display Modes

After the base station MN-500 gets programmed....kaboom

 
 
Robert Hooven
Guest
Posts: n/a

 
      04-04-2004, 02:10 PM
After the MN-500 wireless base station becomes programed
and the networking setup wants to validate my internet
connection, it can't find it. I don't know why it's doing
this, but i decided to reset my base station and the like
after it was causing my internet to disconnect on both the
desktop and laptop computers. It will not allow me to
access the base station management tool. I use Roadrunner
(cable). Please assist when possible =)
 
Reply With Quote
 
 
 
 
Chris H.
Guest
Posts: n/a

 
      04-04-2004, 02:17 PM
See if this Knowledge Base article will help you, Robert:
http://support.microsoft.com/default...&Product=MSbbn
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Robert Hooven" <(E-Mail Removed)> wrote in message
news:1374501c41a4e$84d37b80$(E-Mail Removed)...
> After the MN-500 wireless base station becomes programed
> and the networking setup wants to validate my internet
> connection, it can't find it. I don't know why it's doing
> this, but i decided to reset my base station and the like
> after it was causing my internet to disconnect on both the
> desktop and laptop computers. It will not allow me to
> access the base station management tool. I use Roadrunner
> (cable). Please assist when possible =)



 
Reply With Quote
 
Robert
Guest
Posts: n/a

 
      04-04-2004, 04:29 PM
Chris H, that site you gave me did help, but it's still
not recognizing that i have an active internet connection
to the base station. My computer didn't have an ethernet
port so i had to use a USB-Cat5e converting adapater to
connect it. I'm also running windowes 98, could that be a
problem???
>-----Original Message-----
>See if this Knowledge Base article will help you, Robert:
>http://support.microsoft.com/default.aspx?scid=kb;en-

us;331942&Product=MSbbn
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"Robert Hooven" <(E-Mail Removed)> wrote in message
>news:1374501c41a4e$84d37b80$(E-Mail Removed)...
>> After the MN-500 wireless base station becomes programed
>> and the networking setup wants to validate my internet
>> connection, it can't find it. I don't know why it's

doing
>> this, but i decided to reset my base station and the

like
>> after it was causing my internet to disconnect on both

the
>> desktop and laptop computers. It will not allow me to
>> access the base station management tool. I use

Roadrunner
>> (cable). Please assist when possible =)

>
>
>.
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Base Station MN-500 =?Utf-8?B?S2FtYWxkaXA=?= Broadband Hardware 1 11-22-2005 05:19 AM
Base Station Manager can't find MN-100 Wired Base Station Dominus Broadband Hardware 0 02-03-2005 05:17 PM
configuring the base wireless base station MN500 (b) victor maratovich Broadband Hardware 0 02-01-2005 04:50 PM
MN-100 Base Station Log Dave Broadband Hardware 1 05-05-2004 05:50 AM
base station? james Broadband Hardware 0 02-17-2004 07:04 PM



1 2 3 4 5 6 7 8 9 10 11