Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Advice on replacement for D-Link DI-624+

Reply
Thread Tools Display Modes

Advice on replacement for D-Link DI-624+

 
 
Steve Hawkins
Guest
Posts: n/a

 
      01-03-2007, 07:09 PM
Hi all, I'd appreciate some advice before buying a replacement for our
DI-624+ broadband router.

This worked just long enough to be out of guarantee before its very hot
running finally stopped it working - (I tried replacing a melted capacitor
inside (too close to the processor?) with a bigger one - which seemed to get
it working for a while longer, but not much...)

Anyhow, we now have a pc with a DWL - G520+ adaptor in, which we would hope
to be able to match with something a little more reliable than the DI-624+.

I would also like to be able to buy a USB adaptor for our laptop which would
also be a good match for the new router.

Our local stores seem to have a lot of products but not many staff who know
anything about them...

Any useful advice from ms public users would be much appreciated therefore.

Cheers,

Steve_H


 
Reply With Quote
 
 
 
 
Jack \(MVP-Networking\).
Guest
Posts: n/a

 
      01-03-2007, 08:26 PM
Hi
May be this can Help, http://www.ezlan.net/Wireless_Hardware.html
My current preference is this for regular use,
http://www.newegg.com/Product/Produc...82E16833162173
Or this for Extra Range,
http://www.newegg.com/Product/Produc...82E16833162134
You need the matching Buffalo Cards if you want to benefit from the
125M/sec. extra "Speed"
Otherwise ant card would do, the differences between Wireless Client Cards
is very small. You can first buy Router try it with your current card and
take it from there.
Jack (MVP-Networking).

"Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
news:(E-Mail Removed)...
> Hi all, I'd appreciate some advice before buying a replacement for our
> DI-624+ broadband router.
>
> This worked just long enough to be out of guarantee before its very hot
> running finally stopped it working - (I tried replacing a melted capacitor
> inside (too close to the processor?) with a bigger one - which seemed to
> get it working for a while longer, but not much...)
>
> Anyhow, we now have a pc with a DWL - G520+ adaptor in, which we would
> hope to be able to match with something a little more reliable than the
> DI-624+.
>
> I would also like to be able to buy a USB adaptor for our laptop which
> would also be a good match for the new router.
>
> Our local stores seem to have a lot of products but not many staff who
> know anything about them...
>
> Any useful advice from ms public users would be much appreciated
> therefore.
>
> Cheers,
>
> Steve_H
>



 
Reply With Quote
 
Steve Hawkins
Guest
Posts: n/a

 
      01-07-2007, 03:59 PM
Thanks very much Jack. Those are very handy links, and I will look into the
Buffalo situation here in the UK.

Cheers, thanks for taking the trouble to put this together for me.

Steve_H


"Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi
> May be this can Help, http://www.ezlan.net/Wireless_Hardware.html
> My current preference is this for regular use,
> http://www.newegg.com/Product/Produc...82E16833162173
> Or this for Extra Range,
> http://www.newegg.com/Product/Produc...82E16833162134
> You need the matching Buffalo Cards if you want to benefit from the
> 125M/sec. extra "Speed"
> Otherwise ant card would do, the differences between Wireless Client Cards
> is very small. You can first buy Router try it with your current card and
> take it from there.
> Jack (MVP-Networking).
>
> "Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
> news:(E-Mail Removed)...
>> Hi all, I'd appreciate some advice before buying a replacement for our
>> DI-624+ broadband router.
>>
>> This worked just long enough to be out of guarantee before its very hot
>> running finally stopped it working - (I tried replacing a melted
>> capacitor inside (too close to the processor?) with a bigger one - which
>> seemed to get it working for a while longer, but not much...)
>>
>> Anyhow, we now have a pc with a DWL - G520+ adaptor in, which we would
>> hope to be able to match with something a little more reliable than the
>> DI-624+.
>>
>> I would also like to be able to buy a USB adaptor for our laptop which
>> would also be a good match for the new router.
>>
>> Our local stores seem to have a lot of products but not many staff who
>> know anything about them...
>>
>> Any useful advice from ms public users would be much appreciated
>> therefore.
>>
>> Cheers,
>>
>> Steve_H
>>

>
>



 
Reply With Quote
 
Steve Hawkins
Guest
Posts: n/a

 
      02-06-2007, 01:27 PM
Update:

Initial searching in the UK for WHR G54S got no leads other than US sites
quoting in dollars, and few suppliers were found to even note Buffalo.
However, once the Buffalo site had been found itself, its own links to its
UK site could be followed (don't know why Google didn't seem to find them),
and there there is a useful links page to UK suppliers, several of whom had
the G54S even though Google had not turned them up first time around.

Result: now have WHR G54S and USB adaptor for a laptop too, and the pair at
a lower price than I had seen for just the router on other makes.

Also the Buffalo is only a fraction of the size of our old DI 624+ and looks
ten times better.

The set up info that came with the unit was pretty dire though - a very thin
booklet, and a disc, with neither one saying which was supposed to be used.
The set up 'wizard' on the disc had instructions that actually disappeared
off the side of the screen, and the booklet got one as far as setting up the
open access basic but left one in the dark as to how to set up the security
options. As we did not have an automatic (AOSS) adaptor on the PC this was a
pain and it took me hours of reading up on encryption key formats before I
realised the jargon amounted to me just choosing a password in the usual way
(our old set up had not needed a password to be manually set).

The USB adaptor on the other hand, with its AOSS was a doddle.

So thanks to all for the suggestions and we are very pleased with the
performance so far.
Manufacturers should make more effort to explain encryption and security set
up in the documentation that comes with the product though.

Cheers,

Steve_H

"Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
news:(E-Mail Removed)...
> Thanks very much Jack. Those are very handy links, and I will look into
> the Buffalo situation here in the UK.
>
> Cheers, thanks for taking the trouble to put this together for me.
>
> Steve_H
>
>
> "Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Hi
>> May be this can Help, http://www.ezlan.net/Wireless_Hardware.html
>> My current preference is this for regular use,
>> http://www.newegg.com/Product/Produc...82E16833162173
>> Or this for Extra Range,
>> http://www.newegg.com/Product/Produc...82E16833162134
>> You need the matching Buffalo Cards if you want to benefit from the
>> 125M/sec. extra "Speed"
>> Otherwise ant card would do, the differences between Wireless Client
>> Cards is very small. You can first buy Router try it with your current
>> card and take it from there.
>> Jack (MVP-Networking).
>>
>> "Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
>> news:(E-Mail Removed)...
>>> Hi all, I'd appreciate some advice before buying a replacement for our
>>> DI-624+ broadband router.
>>>
>>> This worked just long enough to be out of guarantee before its very hot
>>> running finally stopped it working - (I tried replacing a melted
>>> capacitor inside (too close to the processor?) with a bigger one - which
>>> seemed to get it working for a while longer, but not much...)
>>>
>>> Anyhow, we now have a pc with a DWL - G520+ adaptor in, which we would
>>> hope to be able to match with something a little more reliable than the
>>> DI-624+.
>>>
>>> I would also like to be able to buy a USB adaptor for our laptop which
>>> would also be a good match for the new router.
>>>
>>> Our local stores seem to have a lot of products but not many staff who
>>> know anything about them...
>>>
>>> Any useful advice from ms public users would be much appreciated
>>> therefore.
>>>
>>> Cheers,
>>>
>>> Steve_H
>>>

>>
>>

>
>



 
Reply With Quote
 
Steve Hawkins
Guest
Posts: n/a

 
      02-09-2007, 07:21 PM
Scrub that: spoke too soon.

USB adaptor only worked for a few days in the laptop before laptop fails to
'recognize USB device' anymore.

Device seems to be registered on our pc, but as it may be responsible for
damaging the USB controller in the laptop (although this continues to
recognize other devices including USB2 devices?) no way am I leaving it
plugged in to the pc!

S


"Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
news:%(E-Mail Removed)...
> Update:
>
> Initial searching in the UK for WHR G54S got no leads other than US sites
> quoting in dollars, and few suppliers were found to even note Buffalo.
> However, once the Buffalo site had been found itself, its own links to its
> UK site could be followed (don't know why Google didn't seem to find
> them), and there there is a useful links page to UK suppliers, several of
> whom had the G54S even though Google had not turned them up first time
> around.
>
> Result: now have WHR G54S and USB adaptor for a laptop too, and the pair
> at a lower price than I had seen for just the router on other makes.
>
> Also the Buffalo is only a fraction of the size of our old DI 624+ and
> looks ten times better.
>
> The set up info that came with the unit was pretty dire though - a very
> thin booklet, and a disc, with neither one saying which was supposed to be
> used. The set up 'wizard' on the disc had instructions that actually
> disappeared off the side of the screen, and the booklet got one as far as
> setting up the open access basic but left one in the dark as to how to set
> up the security options. As we did not have an automatic (AOSS) adaptor on
> the PC this was a pain and it took me hours of reading up on encryption
> key formats before I realised the jargon amounted to me just choosing a
> password in the usual way (our old set up had not needed a password to be
> manually set).
>
> The USB adaptor on the other hand, with its AOSS was a doddle.
>
> So thanks to all for the suggestions and we are very pleased with the
> performance so far.
> Manufacturers should make more effort to explain encryption and security
> set up in the documentation that comes with the product though.
>
> Cheers,
>
> Steve_H
>
> "Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
> news:(E-Mail Removed)...
>> Thanks very much Jack. Those are very handy links, and I will look into
>> the Buffalo situation here in the UK.
>>
>> Cheers, thanks for taking the trouble to put this together for me.
>>
>> Steve_H
>>
>>
>> "Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> Hi
>>> May be this can Help, http://www.ezlan.net/Wireless_Hardware.html
>>> My current preference is this for regular use,
>>> http://www.newegg.com/Product/Produc...82E16833162173
>>> Or this for Extra Range,
>>> http://www.newegg.com/Product/Produc...82E16833162134
>>> You need the matching Buffalo Cards if you want to benefit from the
>>> 125M/sec. extra "Speed"
>>> Otherwise ant card would do, the differences between Wireless Client
>>> Cards is very small. You can first buy Router try it with your current
>>> card and take it from there.
>>> Jack (MVP-Networking).
>>>
>>> "Steve Hawkins" <steve.a.hawkins@ntl(nospam)world.com> wrote in message
>>> news:(E-Mail Removed)...
>>>> Hi all, I'd appreciate some advice before buying a replacement for our
>>>> DI-624+ broadband router.
>>>>
>>>> This worked just long enough to be out of guarantee before its very hot
>>>> running finally stopped it working - (I tried replacing a melted
>>>> capacitor inside (too close to the processor?) with a bigger one -
>>>> which seemed to get it working for a while longer, but not much...)
>>>>
>>>> Anyhow, we now have a pc with a DWL - G520+ adaptor in, which we would
>>>> hope to be able to match with something a little more reliable than the
>>>> DI-624+.
>>>>
>>>> I would also like to be able to buy a USB adaptor for our laptop which
>>>> would also be a good match for the new router.
>>>>
>>>> Our local stores seem to have a lot of products but not many staff who
>>>> know anything about them...
>>>>
>>>> Any useful advice from ms public users would be much appreciated
>>>> therefore.
>>>>
>>>> Cheers,
>>>>
>>>> Steve_H
>>>>
>>>
>>>

>>
>>

>
>



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacement for D-Link DIR-615 (B2) 11n router smlunatick Network Routers 0 03-04-2009 07:44 PM
modem- router replacement Advice Martin ©¿©¬ @REMOVETHIS.plus.com Broadband 13 01-24-2006 12:27 PM
Advice R.E. D-Link 524 & VPN KWW Network Routers 0 08-01-2005 03:45 PM
2 dc's over wan link... need advice Windows Networking 8 06-05-2004 02:31 AM
HOWTO advice needed...Broadband link failover to standalone modem. Paul Smith Broadband 3 10-27-2003 01:03 PM



1 2 3 4 5 6 7 8 9 10 11