Jack, I just recently bought a Linksys USB network adapter for my computer
and we have cable internet so we have a cable modem and a Dell True Mobile
Router connected to the main computer. We've had much difficulty setting up
this wireless internet network. When we purchased the laptop, we had a
really difficult time getting that to connect to the wireless network. I
have tried so many things and am really frustrated. Could you give me basic
instructions on how I would go about connecting my computer with the existing
wireless network?
I saw a set of instructions that said use a flash card, 1. plug it into the
primary computer, go through the wireless connection wizard, then 2. plug it
into the WAP (which I can't because it isn't USB capable) and 3. plug it into
my computer and 4. plug it back into the main computer. My problem right now
is #2. Do you have suggestions for subtitutions to that approach?
I appreciate all your help!
Liane
"Jack (MVP)" wrote:
> Hi
>
> Since you did not indicate what is the Network hardware that you use, I would assume
> that you have a Wireless cable/DSL Router, or an Access Point.
>
> You probably need to install a Wireless card in the additional computer and configure it
> to connect to the Wireless source.
>
> I need a Wireless Card what should I get? - http://www.ezlan.net/faq#wcard
>
> Wireless Basic Configuration - http://www.ezlan.net/Wireless_Config.html
>
> Wireless Security - http://www.ezlan.net/Wireless_Security.html
>
> Jack (MVP-Networking).
>
>
>
>
>
> "Liane" <(E-Mail Removed)> wrote in message
> news:930ACFF1-EBAE-4C03-A488-(E-Mail Removed)...
> > We have three computers in our house (2 desktops and one laptop). The
> > wireless connection is installed and working on 1 desktop and the laptop.
> > Now I want to add my desktop to the existing wireless network, but can't seem
> > to figure out how to do that. I could use any help! thanks
>
>
>
Similar Threads
Linear Mode
