1, Go to one computer click on VIEW WIRELESS NETWORKS
2, Click CHANGE ADVANCED SETTINGS
3, Click on the WIRLESS NETWORKS tab
4, Click the ADD button
5, Type a network name like DELL OPTIPLEX or something like that
6, Have network authentication OPEN
7, Have data encryption DISABLED
8, Put a check mark in the THIS IS A COMPUTER-TO-COMPUTER (AD HOC)
NETWORK; WIRELESS ACCESS POINTS ARE NOT USED
9, Click okay
10, The computer should start acquiring a network address, if not open view
wireless networks and click refresh it will show the network that you made.
Now click connect(connect button is located at the lower right side of the
window).
11. Once the computer is done acquiring the network address and is
connected, go to the second computer and open VIEW AVAILABLE WIRELESS
NETOWORKS on the list of wireless networks click refresh and it should bring
up the wireless network that you created, click connect.
12, Once both computers are connected try to ping each other.
13, Any questions please e-mail me at
(E-Mail Removed)
"ERP" wrote:
> I want to setup a AD HOC wireless network PC to PC WITHOUT any internet
> service or router
>
> I had two Dell PC OptiPlex GX620
>
> OS Microsoft Window XP Professional
>
> Dell Wireless 1450,WLAN USB 2.0 DT Adapter
>
>
> I need Step-by-Step procedure
Linear Mode
