Networking Forums

Networking Forums > Computer Networking > Linux Networking > accessing the net via NAT (VMware)

Reply
Thread Tools Display Modes

accessing the net via NAT (VMware)

 
 
freerollkid
Guest
Posts: n/a

 
      07-26-2005, 05:12 AM
dhclient output:

Listening on LFP/lo/
Sending on LFP/lo/
Sending on Socket/fallback
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 9
No DHCPOFFERS received
No working leases in persistent database - sleeping.

the first time running dhclient the output was somewhat different
showing my isp's ip addresses and connecting me to the net.

after shut down / reboot i ran the program again to get the linux box
online but got the above message unable to access the net through
VMware's NAT (Network Address Translation). might Zone Alarm have
anything to do with this?

BTW i also installed Slack 9 as a Guest OS and running dhclient just
tells me there are "no broadcast interfaces found - exiting".

any advice would be greatly appreciated!

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using tc in VmWare Fedora R C V Linux Networking 1 04-06-2008 08:57 PM
VMware and VNC listen address Pavel Vasilyev Linux Networking 2 04-03-2007 12:13 PM
IAS & VMWare Peter Brown Windows Networking 1 03-05-2007 07:52 PM
ipv6 and vmware Scott Matthews Windows Networking 0 01-30-2004 09:56 PM
vmware, routing Krum Linux Networking 0 12-14-2003 11:05 PM



1 2 3 4 5 6 7 8 9 10 11