Accessing the MN-700 web interface

I am no longer able to access the web interface from my
computer. It is still accessible from another on the
network however. Even when I manually type in the IP of
the router nothing loads; it just stays a blank page and
it times out eventually.
The only thing I've installed that could have cause it to
mess up was some diagnostic tools from my cable isp to
perform tests on my connection. ive removed these tools
however and still no luck.
Any ideas whats wrong?
thanks!

I assume you are using Internet Explorer?

If so, goto Tools, Options
Then the Connections tab
Then Lan settings.

Make sure everything is unchecked there.

See fi that helps

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Primal" <(E-Mail Removed)> wrote in message
news:1bce901c450b3$367f7fb0$(E-Mail Removed)...
> I am no longer able to access the web interface from my
> computer. It is still accessible from another on the
> network however. Even when I manually type in the IP of
> the router nothing loads; it just stays a blank page and
> it times out eventually.
> The only thing I've installed that could have cause it to
> mess up was some diagnostic tools from my cable isp to
> perform tests on my connection. ive removed these tools
> however and still no luck.
> Any ideas whats wrong?
> thanks!

Thanks!
That worked, I'm able to get to is now. Those tools must
have changed my settings. Boooo to that.

>-----Original Message-----
>I assume you are using Internet Explorer?
>
>If so, goto Tools, Options
>Then the Connections tab
>Then Lan settings.
>
>Make sure everything is unchecked there.
>
>See fi that helps
>
>--
>Jason Tsang - Microsoft MVP
>
>Find out about the MS MVP Program -
>http://mvp.support.microsoft.com/default.aspx
>
>"Primal" <(E-Mail Removed)> wrote in
message
>news:1bce901c450b3$367f7fb0$(E-Mail Removed)...
>> I am no longer able to access the web interface from my
>> computer. It is still accessible from another on the
>> network however. Even when I manually type in the IP of
>> the router nothing loads; it just stays a blank page and
>> it times out eventually.
>> The only thing I've installed that could have cause it
to
>> mess up was some diagnostic tools from my cable isp to
>> perform tests on my connection. ive removed these tools
>> however and still no luck.
>> Any ideas whats wrong?
>> thanks!
>
>
>.
>

I think some MS Windows Updates change the settings - IIRC ... not
necessarily the fault of the MN-700.
Not 100% certain though.


"Primal" <(E-Mail Removed)> wrote in message
news:1b65c01c450c0$389f3f80$(E-Mail Removed)...
> Thanks!
> That worked, I'm able to get to is now. Those tools must
> have changed my settings. Boooo to that.
>
> >-----Original Message-----
> >I assume you are using Internet Explorer?
> >
> >If so, goto Tools, Options
> >Then the Connections tab
> >Then Lan settings.
> >
> >Make sure everything is unchecked there.
> >
> >See fi that helps
> >
> >--
> >Jason Tsang - Microsoft MVP
> >
> >Find out about the MS MVP Program -
> >http://mvp.support.microsoft.com/default.aspx
> >
> >"Primal" <(E-Mail Removed)> wrote in
> message
> >news:1bce901c450b3$367f7fb0$(E-Mail Removed)...
> >> I am no longer able to access the web interface from my
> >> computer. It is still accessible from another on the
> >> network however. Even when I manually type in the IP of
> >> the router nothing loads; it just stays a blank page and
> >> it times out eventually.
> >> The only thing I've installed that could have cause it
> to
> >> mess up was some diagnostic tools from my cable isp to
> >> perform tests on my connection. ive removed these tools
> >> however and still no luck.
> >> Any ideas whats wrong?
> >> thanks!
> >
> >
> >.
> >

Windowsupdate, in my experience, doesn't touch those options.

Usually, it's bits from ISP's that touch that, especially to add proxy info
and the such...

--
Jason Tsang - Microsoft MVP

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx

"Kerry Liles" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> I think some MS Windows Updates change the settings - IIRC ... not
> necessarily the fault of the MN-700.
> Not 100% certain though.
>
>
> "Primal" <(E-Mail Removed)> wrote in message
> news:1b65c01c450c0$389f3f80$(E-Mail Removed)...
> > Thanks!
> > That worked, I'm able to get to is now. Those tools must
> > have changed my settings. Boooo to that.
> >
> > >-----Original Message-----
> > >I assume you are using Internet Explorer?
> > >
> > >If so, goto Tools, Options
> > >Then the Connections tab
> > >Then Lan settings.
> > >
> > >Make sure everything is unchecked there.
> > >
> > >See fi that helps
> > >
> > >--
> > >Jason Tsang - Microsoft MVP
> > >
> > >Find out about the MS MVP Program -
> > >http://mvp.support.microsoft.com/default.aspx
> > >
> > >"Primal" <(E-Mail Removed)> wrote in
> > message
> > >news:1bce901c450b3$367f7fb0$(E-Mail Removed)...
> > >> I am no longer able to access the web interface from my
> > >> computer. It is still accessible from another on the
> > >> network however. Even when I manually type in the IP of
> > >> the router nothing loads; it just stays a blank page and
> > >> it times out eventually.
> > >> The only thing I've installed that could have cause it
> > to
> > >> mess up was some diagnostic tools from my cable isp to
> > >> perform tests on my connection. ive removed these tools
> > >> however and still no luck.
> > >> Any ideas whats wrong?
> > >> thanks!
> > >
> > >
> > >.
> > >
>
>