One more thing to add;
After Wireless Network Setup, there is a rectangular box with "X"
at the top: RUNDLL
Error in wzcdlg.dll
missing entry:
FlashConfigreat Network
[OK] in the middle of the bottom
Thanks,
"Violet" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Thanks for the response.
>
> I lost Internet Connection after I disconnected Linsky Adapter for about
> a week or so. Then, I tried to rescue Wireless Internet Connection.
>
> There are picture in the middle of the screen,
>
> On the left is : Adapter
> In the Middle is : Router
> There is a sign of signal in between
>
> On the right is : Internet
> There is NO signal sign between two, from Router to Internet
>
> and, at the top of pictures, it says,
> You are connected to the access point, but the Internet cannot be found.
>
> Thanks,
>
> "Jack (MVP-Networking)." <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Hi
>> Impossible to answer unless you explain what the Access Point is
>> connected to, and where the Internet is coming from to the Access Point.
>> If this is an Open Access Point that does not belong to you, either it is
>> protected, or it is a LAN Access Point that has No connection to the
>> Internet.
>> Jack (MVP-Networking).
>>
>> "Violet" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> Hi:
>>> One of the PCs has connection issue.
>>>
>>> It says, ....
>>> "You are connected to the access point, but the
>>> Internet cannot be found.'
>>>
>>> Questions are;
>>> (1) What does that mean?
>>>
>>> (2) How to cure this issue?
>>>
>>> Thanks for any help.
>>>
>>
>
>
|