900AP+ h/w rev A/B/C - any difference?

I see from the D-Link web site
http://support.dlink.com/products/dwl900ap+.asp
that there are 3 different hardware revisions of the 900AP+
From the above link I can tell that Rev C has the ARM9 processor whereas the A&B only have
the ARM7. My questions are:

- any real difference between the 3 revisions?
- if so, should I be only looking for the Rev C 900AP+ assuming that the latest is the
best?

I am looking to buy 2 900AP+ units and it is hard to find/get those rev C units. Either
the walk-in places only have the A/B or the online places do not know/do not reply back.
Anybody know where I can buy a rev C 900AP+ (2 actually) on-line?

Thanks,

Bought one each from Newegg and Amastore. Both the new models. Bought to
use the repeater function, which I just hooked up. Went from 50% signal
strength to 80%. I'm happy, I guess.

Rob wrote:
>>- any real difference between the 3 revisions?
>>- if so, should I be only looking for the Rev C 900AP+ assuming that the
>
> latest is the
>
>>best?
>
>
> Get the C1 hardware, better firmware upgrade path plus I think the reciever
> may be better(more sensitive).
> I have long range tests (3 mile) to do on 2 C1's in the next few days.
> Will keep you posted.
> Forget asking tech support, they will tell you nothing more than you can
> find by surfing around for the specs.
>
>
>>I am looking to buy 2 900AP+ units and it is hard to find/get those rev C
....

The remote computer, using a DLink 520+, and the DLink software.

Rob wrote:
> Hi Airman,
>
>>use the repeater function, which I just hooked up. Went from 50% signal
>>strength to 80%. I'm happy, I guess.
>
>
> How did you measure the signal strength?
>
> Cheers
>
> Rob
>
>

Hi Airman,
I am thinking of buying a DWL 520+ for homemade antenna testing, a load of
customers at ebuyer.co.uk are complaining about it crashing their system, do
you find this?

Cheers

Rob

"Airman Basic" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> The remote computer, using a DLink 520+, and the DLink software.
>
> Rob wrote:
> > Hi Airman,
> >
> >>use the repeater function, which I just hooked up. Went from 50% signal
> >>strength to 80%. I'm happy, I guess.
> >
> >
> > How did you measure the signal strength?
> >
> > Cheers
> >
> > Rob
> >
> >
>

"Rob" <(E-Mail Removed)> wrote in message news:<zVBSa.5698$(E-Mail Removed)>...
> > - any real difference between the 3 revisions?
> > - if so, should I be only looking for the Rev C 900AP+ assuming that the
> latest is the
> > best?
>
> Get the C1 hardware, better firmware upgrade path plus I think the reciever
> may be better(more sensitive).
> I have long range tests (3 mile) to do on 2 C1's in the next few days.
> Will keep you posted.
> Forget asking tech support, they will tell you nothing more than you can
> find by surfing around for the specs.
>
> > I am looking to buy 2 900AP+ units and it is hard to find/get those rev C
> units. Either
> > the walk-in places only have the A/B or the online places do not know/do
> not reply back.
> > Anybody know where I can buy a rev C 900AP+ (2 actually) on-line?
>
> ebuyer.com will supply you with the latest C1 hardware at a good price.
>
> Cheers
>
> Rob

Did you get the link up yet? Any trees in the line of sight that you
had to worry about? I'm looking at the antennas available and the
nil-jon antennas for 2.4ghz (wifi-plus.com) seem to be the best, but
I'm not finding many resources/reviews on them. I'd love to here what
kind of results and throughput you're getting over that 3 mile link,
and from what antenna heights.

-hk