3com and port forwarding.

Hi,
I have a 3 com 3CRWE754G72 ADSL Wireless 11g router with firewall. I need to
open ports 5060 and 5061 to use with my VOIP box. There's a folder Special
Aplications, which should open the port. It asks me to enter:
1 Specify the trigger port (the one used by the application when it is

initialized) in the Trigger Port column, and specify whether the trigger is

TCP or UDP.

2 Specify the Public Ports used by the application, that will need to be

opened up in the firewall for the application to work properly. Also

specify whether these ports are TCP or UDP.

3 You can temporarily enable or disable each entry in the table by checking

or unchecking the Enabled checkbox.

Any idea what should I do to open these ports? I never saw anything of this
kind, or is there some other place to do that has required options?

Regards,

Raphael

In article <eoiutb$271$(E-Mail Removed)>, raph1978
@NOSPAMneostrada.pl says...
> Hi,
> I have a 3 com 3CRWE754G72 ADSL Wireless 11g router with firewall. I need to
> open ports 5060 and 5061 to use with my VOIP box. There's a folder Special
> Aplications, which should open the port. It asks me to enter:
> 1 Specify the trigger port (the one used by the application when it is
>
> initialized) in the Trigger Port column, and specify whether the trigger is
>
> TCP or UDP.
>
> 2 Specify the Public Ports used by the application, that will need to be
> opened up in the firewall for the application to work properly. Also
> specify whether these ports are TCP or UDP.

Create an entry for public port5060 with both TCP and UDP and again for
5061 TCP and UDP, both forwarding to 5060 and 5061 respectively to the
LAN IP address of your VoIP box (probably something like 192.168.1.5)

> 3 You can temporarily enable or disable each entry in the table by checking
> or unchecking the Enabled checkbox.

Tick each entry that you have created.
--
Regards
Jon

"Jon" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> In article <eoiutb$271$(E-Mail Removed)>, raph1978
> @NOSPAMneostrada.pl says...
>> Hi,
>> I have a 3 com 3CRWE754G72 ADSL Wireless 11g router with firewall. I need
>> to
>> open ports 5060 and 5061 to use with my VOIP box. There's a folder
>> Special
>> Aplications, which should open the port. It asks me to enter:
>> 1 Specify the trigger port (the one used by the application when it is
>>
>> initialized) in the Trigger Port column, and specify whether the trigger
>> is
>>
>> TCP or UDP.
>>
>> 2 Specify the Public Ports used by the application, that will need to be
>> opened up in the firewall for the application to work properly. Also
>> specify whether these ports are TCP or UDP.
>
> Create an entry for public port5060 with both TCP and UDP and again for
> 5061 TCP and UDP, both forwarding to 5060 and 5061 respectively to the
> LAN IP address of your VoIP box (probably something like 192.168.1.5)
>
>> 3 You can temporarily enable or disable each entry in the table by
>> checking
>> or unchecking the Enabled checkbox.
>
> Tick each entry that you have created.
> --
> Regards
> Jon
>
Hi Jon,
Thanks for your help. It worked nicely
Regards,
Raphael