3Com 3CRPAG175 & U.S.Robotics 9106

In case anyone else encounters this issue:

I installed software version 4.1.2.56 (Win XP Prof) for the 3CRPAG175 XJACK
wireless PC Card. The USR9106 ADSL wireless gateway has version 2.5.1
firmware
installed. If in USR9106's Wireless AP>Advanced Settings | 54g Mode is set
to
"54g Performance" there is no connection, however if 54g Mode is set to "54g
Auto",
connection is successful. ["54g Performance": "...select the mode to 54g
Performance
for the fastest performance among 54g certified equipment..."]

With the older 3CRPAG175 software 1.0.0.36, connection was successful with
the mode set to "54g Performance", so the above issue was a surprise.

Lapimate