3 Access Points in 1 DHCP

Hello.I have this problem: I have 3 Linksys in 1 building-2 floors and
i have a DHCP.But when a new device want to have e-net i assign it in
the 3 networks.My thought is that i want to connect the 3 DHCP in one
and when i assign in whatever dhcp,when the client moves in other floor
also to have access to e-net....Please help!

Are the linksys devices routers?

If so, disconnect the devices temporarily from the network and do the
following:

1) Change pulic IP address of all but one router

Router A: 172.16.88.88
Router B: 172.16.88.89
Router C: [leave the same]

2) Change the internal IP address to be in the same range

[Assume your internal IP space is 192.168.93.xxx]

Router A: 192.168.93.2
Router B: 192.168.93.3
Router C: 192.168.93.1

3) Disable DHCP on all but one router

Router A: Disabled
Router B: Disabled
Router C: Enabled

4) Plug the devices back into the network:

Router A: Plug into LAN port
Router B: Plug into LAN port
Router C: Plug into WAN/Internet port

Any wireless clients should now pull an IP from the LAN, and allow for
roaming between the networks.

That being said, this is a less-than-proper way to design a network.
You really need to have "Access Points".

Chris
- - - - - - - - - - - - - - - - - - - -
Christopher M. Hutchison, CEO
NetSteady Communications, Ltd.

Phone: 614-255-5575
Mobile: 614-853-0091
Skype: wifi_chris

http://www.netsteady.cc