"Gator" <(E-Mail Removed)> wrote in news:2nfob8FcoqdU1@uni-
berlin.de:
> My company net has WEP 256 bit encryption. Access #
> is derived freom a company phone number. A D-Link
> AP is used. I use a SMC card in the notebook which
> has 64 or 128 bit encryption. It allows HEX, ASCII,
> or passphrase input. What do I do? Get a different
> card? Thanks anyone..
If you wish to associate with the AP, you will need the correct WEP
key.
WEP encryption using a 256 bit key is implemented in wireless
chipsets from Texas Intruments [and no others, BICBW]. Brands which
include TI chipsets include D-Link (usually models with a + in the
name) and USR, as well as some others. A further clue is that TI-
based devices support the 22 Mbit/s speed (and 33 Mbit/s on 802.11g
kit), so if this is mentioned it's pretty certain that 256 bit WEP is
supported.
The difficulty is in knowing what is inside any specific device; D-
Link in particular re-uses model names/numbers while changing the
internals of their kit...
Hope this helps
--
Richard Perkin
To email me, change the AT in the address below
richard.perkinATmyrealbox.com
It's is not, it isn't ain't, and it's it's, not its, if you mean it
is. If you don't, it's its. Then too, it's hers. It isn't her's.
It isn't our's either. It's ours, and likewise yours and theirs.
-- Oxford University Press, Edpress News
|
Linear Mode
