boxers999 wrote:
> Hi All,
>
> I have a RH9 box with 2 NIC's. One is my outside (eth0) 217.x.x.x and
> the other is the inside (eth1)192.168.0.253.
>
> The inside is wired to a switch and the outside goes to a BT router
> with static ip. The switch on the inside will have 1 pc connected with
> the ip 192.168.0.90 and the gateway set as 192.168.0.253.
>
> On the linux box I can access the internet through eh0 without any
> problem. I can ping the laptop on 192.168.0.90 no problem. The laptop
> can ping 217.x.x.x and 192.168.0.253 no problem.
>
> I have set ip_forward to 1
>
> What else do I need to do to get 192.168.0.90 on the internet thorough
> the redhat box ?
>
> Thanks for the help.
>
You need the NAT.
Have a look at Rusty's Remarkably Unreliable Guides at
<http://people.netfilter.org/rusty/unreliable-guides/>.
The 2.4 guide works pretty well with 2.6, too.
HTH
--
Tauno Voipio
tauno voipio (at) iki fi
|
Linear Mode
